9-33
FITTED EQUIPMENT
SLEEPING ARRANGEMENTS
Fixed Rear Bed
The fixed rear bed comprises a Frolexus
electrically adjustable orthopaedic double
bed system, which allows each side of the
bed to be individually adjusted to suit each
occupant, using a hand held control unit.
Transverse Double Bed
Slide out the seat base of each inward facing
seat until they meet in the middle of the
vehicle. Use the backrest cushion of each
seat to fill the space created between the
base cushion and the side of the vehicle.
Overcab Bed
To use this bed, release the retaining
mattress board from its vertical position and
fold flat by pulling it forward. To gain access
to the bunk use the ladder supplied ensuring
that it is securely fixed into the retaining clips.
Slide the mattresses across so that they fit
tight to the front, then make up the bedding
before lifting up the attached bunk net and
clipping it into position.
When bunks are used by children, especially
under six years of age, care shall be taken
against the risk of falling out.
To Next Page
