33
The Whale ‘Heat Air’ space heater uses a combined
control panel that controls both the vehicle heating
and the vehicles domestic hot water system.
Meaning of the various symbols
Space heater on/off and power source
selection button
0.75kW electric selected
1.50kW electric selected
3.00kW electric selected
Gas selected
Gas and electric selected
External control from
alternative source*
Increase temperature button
Whale Heat Air Space Heater
Owners Handbook
Whale Heat Air Space HeaterTruma CP
This warning triangle symbol indicates that the
Combi heater is not currently running due to a
requirement of 240 volt Electric or 12volt supply or
it is in a cool down procedure.
Once 240 volts
is connected or 12volt
supply is switch on the
Combi will automatically
re start.
To Read out warning code
– Select the triangle icon with rotary push button.
– Tap the rotary push button.
The current warning code will be displayed.
The cause of the warning can be determined and
remedied with the aid of the troubleshooting guide
W = Warning
42 = Fault code
H = Heater
Error Code
In the event of an Error occurring the Truma CP
plus control panel will immediately displays the
error code on the screen.
The cause of the Error can be determined and
remedied with the aid of the trouble-shooting guide
found at the back of the handbook.
Resetting Error code
– Once you have identified and solved the error.
i.e. ensuring a good supply of gas etc.
– You then need to tap the rotary button to
activate the background lighting and then
scroll to warning triangle and tap again to
acknowledge the Error.
– The Combi will restart at this point.
If you do not follow procedure and keep pressing
the incorrect icons the Cp+ plus will go into safe
mode. The fault code flashes in the control panel
display, this cannot be reset until up to 15 minutes
have elapsed.
Warning
W 407 H
E 517 H
To Next Page