Reverse the wheelchair towards the
turned out swivel base Turnout or the
lowered car seat lift Turny.
From wheelchair to vehicle
1. Reverse the wheelchair 2. Disengage the motors 3. Adjust the seat height
Disengage the motors by pulling the
handle, placed on the left side of the
wheelchair, forward. Move the wheel-
chair towards the swivel base.
Level the seat height to the rails in the
vehicle. The height is adjusted by first
pressing the seat lift button, marked 1,
and then by moving the joystick forwards
or backwards.
36
Carony Go Getting seated
To Next Page
Loading...
