Push the wheel unit towards the rails
in the vehicle. The covers of the clutch
open automatically. Push until it connects
properly to the vehicle rails. Make sure
the units have been properly connected
by trying to pull them apart.
4. Lock
5. Transfer the seat
Release the seat from the vehicle by
pulling down the seat release handle at
the front of the seat. Slide the seat over
to the wheel unit until it locks at end
position. Make sure that the seat release
handle has returned to original posi-
tion and that the seat is unable to slide
backwards!
6. Prepare for drive
Height adjust to compensate movement
of weight. Release the wheelchair from
the vehicle by pulling both lock handles
placed at the front. Adjust the seat
height to lowest position. This is impor-
tant for the balance of the chair. Engage
the motors!
39
Getting seated Carony Go
To Next Page
Loading...
