Autoadapt Turny - Fit console; Fit safety profiles; Fit link rod

For quick and safe installation of Turny, we recommend a car-specific console
from Autoadapt. Order a universal console if a car-specific one is not available. To
see the range of consoles, please visit dealerweb.autoadapt.com.
Follow the assembly instructions provided with the console and then continue
with the next step below.
Fit safety profiles
Fit console
For the sake of clarity in showing how the safety profiles are fitted, Turny is not
shown in the illustrations below.
Put Turny on the console plate. Place the safety profiles around the slide bars.
Move Turny backwards to access the fastening at the front. Move Turny forwards
to access the fastening at the back.
Note! Flat side down.
Fit link rod
Tighten the lock nut until the link rod can slide
easily in the groove without catching.
Move backwards
Move forwards
Note! Flat side down.
15
Getting seated Turny
EN
Installation