Browsing through Pre-set Stations
• Your AutoDAB will come with pre-set’s already loaded. To browse through your pre-set’s, simply use the
‘Pre-set Up/Down’
Scanning for Stations
• To update the available station in your current location, press ‘Scan’ and the audio message ‘Scanning
will repeat twice.
• After scanning, the car radio will display the total number of DAB stations found and the number of DAB
stations currently available e.g. 63 Stations have been found, 53 stations are available.
• Note: Found stations are all the stations that have been found in all scanned areas
Available stations are the stations that have been found in this scanned area
• After a short delay, the car radio will display the rst available DAB station name e.g. Absolute
Navigating the Station List (Alphabetical)
• Press ‘Station Left/Right’ to move up or down the station list from the current tuned station.
• Tip - If you are looking for a specic station, then go to the pre-set nearest to it in the alphabet and
move up and down from there.
Adding/Deleting Pre-sets
• When you locate a station that you want to add or delete from your pre-sets, simply press ‘Add/Del’.
• If the pre-set is not already in your pre-set list, then the station will be added, and the voice conrmation
‘Pre-set Added’ will be heard.
• If the pre-set is already included within your list, then it will delete the pre-set and the voice conrmation
‘Pre-set Deleted’ will be heard.