Autohaus AHBC-3.8i - User Manual

BASIC SPECIFICATION:
Input voltage: 240V AC 50HZ
Input current: 0.8A RMS max.
Cut off voltage: 7.4V, 14.4V or 14.7V
Charging current: 3.8A or 0.8A
Operating temperature: -20
° C to +50 ° C
Battery type: all 12V electrolyte battery types (lead, AGM, maintenance-free, “Marine Deep Cycle
” etc.)
Battery capacity: 4 Ah - 120 Ah
Dimensions: 18 x 6 x 4.3 cm (l/w/h)
Weight: 0.47 kg
Marketed by:
AUTOHAUS PRODUCTS NZ
71 Adams Drive Pukekohe
Auckland, New Zealand.
Ph: 0800 473 743
www.autohausnz.com

Summary

Intelligent Battery Charger

Safety Warnings and Precautions

Risk of Battery Explosion from Hydrogen Gas

Precautions to reduce the risk of battery explosion from hydrogen gas during operation.

Charging Operation

Step-by-step guide for operating the battery charger.

During Use

Battery in a Vehicle

Instructions for charging a battery installed inside a vehicle.

Battery Out of a Vehicle

Instructions for charging a battery removed from a vehicle.

Corrosive Substances Hazard

Precautions when handling corrosive battery substances.

Electrical and Fire Hazard

Safety precautions related to electrical and fire hazards during use.

General Warnings

General safety advisories for users and equipment.

Operating Instructions

Product Diagram

Visual identification of the battery charger components.

Preparation for Battery Charging

Steps to prepare the battery and environment before charging.

Placing the Battery Charger

Guidance on positioning the charger safely and correctly.

DC Connection Safety Cautions

Safety measures for connecting the charger's DC clips to the battery.

AC (Mains) Connection Safety Cautions

Safety measures for connecting the charger's AC power cord.

Autohaus AHBC-3.8i Specifications