Need help?Do you have a question about the AUTOHELM 1000 and is the answer not in the manual?
Details on actuator unit mounting, magnetic sensing, and socket positioning for optimal installation.
Instructions for mounting the unit on the port side, requiring a special system.
Using extensions to increase mounting distance for flexible installation configurations.
Various attachments to adjust ballpin height for secure tiller connection.
Mounting the autopilot on a vertical face like a sidewall for specific cockpit layouts.
Raising the autopilot socket height using pedestal assemblies for ergonomic access.
Description of the wind vane attachment, its modules, transducer head, and electrical connection.
Connecting the feedback drive cord from the wind vane to the pushrod for proper operation.
Steps to test the autopilot's functionality before attempting sea trials.
How to steer the vessel using the autopilot's internal compass mode.
Guidance for operating the autopilot effectively while sailing.
Setting up and using the autopilot with the wind vane attachment for wind-based steering.
General tips and best practices for optimal autopilot usage and performance.
Importance of proper sail balance for autopilot performance, especially in gusty conditions.
Adjusting the wind vane sensitivity for optimal performance and power consumption.
Guidance on choosing between the magnetic sensor and wind vane transducer for operation.
Procedures for tacking the vessel using the autopilot in confined or challenging waters.
Emphasizes the importance of maintaining a proper watch while the autopilot is engaged.
Instructions for safely storing the autopilot system when not in use.
Information on the system's maintenance requirements, noting no regular maintenance is needed.
Details on actuator unit mounting, magnetic sensing, and socket positioning for optimal installation.
Instructions for mounting the unit on the port side, requiring a special system.
Using extensions to increase mounting distance for flexible installation configurations.
Various attachments to adjust ballpin height for secure tiller connection.
Mounting the autopilot on a vertical face like a sidewall for specific cockpit layouts.
Raising the autopilot socket height using pedestal assemblies for ergonomic access.
Description of the wind vane attachment, its modules, transducer head, and electrical connection.
Connecting the feedback drive cord from the wind vane to the pushrod for proper operation.
Steps to test the autopilot's functionality before attempting sea trials.
How to steer the vessel using the autopilot's internal compass mode.
Guidance for operating the autopilot effectively while sailing.
Setting up and using the autopilot with the wind vane attachment for wind-based steering.
General tips and best practices for optimal autopilot usage and performance.
Importance of proper sail balance for autopilot performance, especially in gusty conditions.
Adjusting the wind vane sensitivity for optimal performance and power consumption.
Guidance on choosing between the magnetic sensor and wind vane transducer for operation.
Procedures for tacking the vessel using the autopilot in confined or challenging waters.
Emphasizes the importance of maintaining a proper watch while the autopilot is engaged.
Instructions for safely storing the autopilot system when not in use.
Information on the system's maintenance requirements, noting no regular maintenance is needed.
General| Brand | AUTOHELM |
|---|---|
| Model | 1000 |
| Category | Autopilot System |
| Language | English |
To Next Page
