Autolux UNI/L version User Manual

Autolux ~ Universal Lighting Controller
Installation and User Manual
for UNI/L version
Quick Guide
Increase a value.
Decrease a value.
Accept a newly entered value.
Cancel overtime, holiday,
edited value or current
submenu.
Apply British Summer Time or
Greenwich Mean Time.
Enter the settings menu.
Initiate or quickly extend a
time program.
Initiate a holiday period.
End overtime, holiday or reset
time logs in engineers menu.
Toggle the display between
time and sensor readings

Autolux UNI/L version Specifications

General

Brand	Autolux
Model	UNI/L version
Category	Lighting Equipment
Language	English

Summary

Introduction

Technical Specifications

Operating Environment

Details operating temperature, humidity, IP rating, pollution degree, and safety construction.

Performance Specifications

Outlines control mounting, software type, action, supply protection, and sensor input details.

Electrical Specifications

Covers power supply, relay ratings, load limits, 0-10V signals, and sensor cable resistance.

Installation Procedures

Control Assembly Mounting

Provides guidelines for controller placement, height, lid rotation, and mounting surface requirements.

Wiring Specifications and Connections

General wiring rules, cable types, lengths, separation, and terminal identification for connections.

Sensor and Switch Wiring

Covers wiring for occupancy and light level sensors, grouping sections 2.4 and 2.5 on page 9.

Additional Wiring Connections

Details wiring for remote switches, panic switches, and temperature sensors on page 10.

Operating the Controller

Button Functions

Explains the function of each of the ten control buttons on the unit.

Display Indicators

Describes how the controller display shows time, day, and zone status indicators.

Setting Operational Parameters

Guides users through setting general parameters, clock time, day, and auto mode configurations.

Programming Schedules and Features

Details programming daily on/off times, lux levels, GMT/BST, extend, and holiday modes.

System Information and Maintenance

Covers viewing sensor status, battery type, and replacement procedures.

Advanced Engineer Functions

PIN Protection and Access

Details how to set and use a PIN code to protect engineer functions and access control settings.

Engineering Function Programming

Explains how to access and program various engineering functions using codes and variables.