Need help?Do you have a question about the Automated Logic ZS Pro and is the answer not in the manual?
General| Product Type | Zone Sensor |
|---|---|
| Communication Protocol | BACnet MS/TP |
| Temperature Sensor | Yes |
| Relative Humidity Sensor | Yes |
| Display | LCD |
| Mounting | Wall Mount |
| Power Supply | 24 VAC |
| Operating Temperature | 32°F to 122°F (0°C to 50°C) |
Slide the sensor's potentiometer up or down to adjust the zone temperature setpoint.
Temporarily set the zone to occupied or unoccupied state via button presses.
Learn to cycle through Home, Setpoint adjustment, Information, and Diagnostic screens.
Understand icons for temperature units, humidity percentage, and other status indicators.
Learn how to simultaneously press buttons to lock/unlock sensor controls.
Adjust editable values on the sensor display using up/down buttons.
Manually turn on heating, cooling, or fan only modes via button presses.
Cycle through fan speed options (Auto, Low, Medium, High) using the fan button.
Press the F/C button to switch zone temperature display between Fahrenheit and Celsius.
List of Rnet tag numbers for sensor values like temperature, humidity, CO2, and VOC.
Rnet tags related to setpoints, status, and system parameters like fan speed and mode.
Rnet tags indicating alarms, system failures, and custom tag interpretations.
To Next Page
