To Next PageTo Next Page
Need help?Do you have a question about the AUTOMATION 2000 DGPT2 Series and is the answer not in the manual?
General| Brand | AUTOMATION 2000 |
|---|---|
| Model | DGPT2 Series |
| Category | Transformer |
| Language | English |
Provides context and disclaimer for the installation procedure.
Lists essential checks before installing the DGPT2® unit.
Details step-by-step process for fitting DGPT2® onto a transformer.
Provides context and disclaimer for the installation procedure.
Lists essential checks before installing the DGPT2-IB unit.
Details step-by-step process for fitting DGPT2-IB onto a transformer.
Details torque and sequence for tightening fixing hooks.
Specifies how to ensure drain tap leakproofness without tape.
Introduces change-over contacts for monitoring functions.
Illustrates electrical connections and states of DGPT2®.
Explains gas discharge based on volume and dielectric density.
Describes how excessive pressure affects pressure switch contacts.
Explains how temperature changes affect thermostat contacts.
Lists safety and setup checks before performing tests.
Details procedure to test gas discharge detection mechanism.
Describes testing pressure switch functions (Type 1 & 2).
Explains testing T1 and T2 thermostat functions.
Provides guidelines for cleaning the DGPT2® plastic body safely.
Addresses restoring plastic body transparency due to deposits.
Lists chemicals/solvents not to use for plastic body cleaning.
Details specifications and ratings of the metal housing.
Details specifications and ratings of the plastic body.
Specifies characteristics and accuracy of the reed contact.
Details specifications and accuracy of the pressure switch.
Specifies characteristics and accuracy of the thermostats.
Details specifications and accuracy of the thermometer.
Describes fitting dimensions and material properties.
Defines ambient and dielectric temperature operating limits.
Lists breaking capacity ratings for functions and voltages.
Lists standards to which the DGPT2® conforms.
Option for two identical Reed contacts for gas detection.
Option for two Reed contacts with offset triggering thresholds.
Option for two pressure contacts with identical thresholds.
Option for two pressure contacts with offset thresholds.
Option for an industrial Harting connector for easy wiring.
Option for thermometer visible on the metal housing cover.
Option for body/flange for higher dielectric temperatures.
Option for conservator connection via 3/8" male inserts.
Option for a marine cable gland for secure cable connection.
Option for a Pt100 sensor for temperature measurement.
Option for an 80°C PTC thermistor for temperature measurement.
Option for a drain tap with a popoff relief valve.
Option for DGPT2® suitable for industrial/marine environments.
Spare part for the standard DGPT2® Reed contact.
Spare part for DGPT2® with option 2G.
Spare part for DGPT2® with option 2GD.
Accessory: corrugated hose for conservator connection.
Accessory to prevent spurious releases in magnetic environments.
Spare part for drain tap, nickel plated brass.
Spare part for drain tap with popoff relief valve.
Spare parts for fixing hooks, steel or AISI 316L.
Spare part: FPM seal for the drain tap.
Spare part: FPM seal for the flange.
