Unit of measure: Sets the unit of measure to English or Metric.
Beep: Turns on/off beep.
Device Self-Test: Checks if the LCD display, LED lamps and
keyboard are working normally.
9
10
When more than one vehicle control module is detected by the
scanner, you will be prompted to select the module where the
data may be retrieved.
CAUTION: Don’t connect or disconnect the scanner with ignition
on or engine running.
Help
The Help function allow viewing of some important information
such as tool information, information for OBD and Datastream.
Select Help from Main Screen.
View Tool Information in Help menu.
OBD II Diagnostics
The DTC Lookup function is used to search for definitions of
DTCs stored in the DTC library and for code breaker information.
DTC Lookup
The Review function allows viewing of data from last test
recorded by the scanner.
Review
Select Review from Main Screen.
Use the UP/DOWN scroll button to select the desired item from
Review menu, and press the OK button.
The scanner allows you to make the following adjustments and
settings:
Tool Setup
Languages: Selects the desired language.
Turn the ignition off.
Connect OBD II connector of scanner to the vehicle’s DLC.
Turn the ignition on. Engine can be off or running.
To Next Page
Loading...
Need help?
General