AUTOOL X60 Car OBD Multi-Function Meter
User Manual
■Product Introduction
Supported Vehicle
For petrol vehicle with standard OBD-II protocol, especially for vehicle
without water gauge, speedometer and fuel consumption meter.
Installation
X60 is a OBD multi-function meter, with smart and fashion design. It is
easy to install. OBD port helps you use it once connection. No need to
destroy the wire.
Hardware
CPU based on 32 bit ARM CORTEX-M3 kernel; Maximum operating
frequency: 72MHz; Support multiple high speed auto communication
protocols.
Warning Function:
Supporting water temperature warning, over-speed alarm, shifting
reminding, vehicle malfunction warning, which secure safe driving.
Trouble code clearing:
Support code scanning and general code clearing.
Product Parameter
Operating voltage: 10-18V DC Operating current: <80mA
Sleep current: <15mA Operating Temperature: -20~75℃
Volume: 60mm×50mm×67mm
Product packing list: host, OBD cable, 3M double-sided tape, user
manual, certificate.
■Product Description
X60 OBD computer is a smart and powerful auto meter. It is
especially designed for vehicle without speedometer, engine
To Next Page
Need help?
General
