Autoscope Technology Usb Autoscope Lite User Manual

USB Autoscope Lite – Operation Manual
Operation Manual for USB Autoscope Lite
Please read this manual thoroughly before attempting to operate the device.
Contents
1. Purpose.......................................................................................................................................2
2. Technical characteristics of the USB Autoscope Lite.............................................................2
2.1 General...................................................................................................................................2
2.2 Analog oscilloscope mode.....................................................................................................3
2.3 Software.................................................................................................................................3
2.4 Parameters of the USB port's galvanic isolation....................................................................4
2.5 Front panel elements..............................................................................................................5
2.6 Back panel elements..............................................................................................................5
2.7 Ground cord...........................................................................................................................6
3. Preparing the computer for use with the USB Autoscope Lite.............................................7
3.1 Minimum Laptop or PC requirements...................................................................................7
3.2 Installation of the USB Oscilloscope program and utilities..................................................8
3.3 Installation of the device drivers..........................................................................................12
4. Preparing the device for use....................................................................................................13
5. Manufacturer limited warranty.............................................................................................14
6. Troubleshooting........................................................................................................................14
6.1 The device does not turn on.................................................................................................14
6.2 "USB transfer error"............................................................................................................14
http://usbautoscope.eu/ 1

Autoscope Technology Usb Autoscope Lite Specifications

General

Brand	Autoscope Technology
Model	Usb Autoscope Lite
Category	Storage
Language	English

Summary

Purpose of the USB Autoscope Lite

Technical Characteristics of the USB Autoscope Lite

General Specifications

Basic technical specifications including interface type, power source, and data transfer.

Analog Oscilloscope Mode

Details on analog channels, voltage ranges, input impedance, and sampling frequency.

Software Features

Supported operating systems and main software functions like real-time display and recording.

USB Port Galvanic Isolation Parameters

Parameters for the USB port's galvanic isolation, including resistance and capacitance.

Front Panel Elements

Description and identification of front panel connectors and indicators.

Back Panel Elements

Description and identification of back panel connectors and indicators.

Ground Cord

Information on connecting and using the ground cord for measurements.

Computer Preparation and Software Installation

Minimum System Requirements

Minimum processor, RAM, disk space, and OS requirements for the computer.

Software and Utilities Installation

Step-by-step guide for installing the USB Oscilloscope program and utilities.

Device Driver Installation

Instructions for installing the device drivers after software setup.

Device Preparation for Use

Manufacturer Limited Warranty

Troubleshooting

Device Not Turning On

Common issues and solutions when the device fails to power on.

USB Transfer Error

Explains the 'USB transfer error' and provides steps for resolution.