Need help?Do you have a question about the Autotek 7007 and is the answer not in the manual?
Details INPUT 1/2 connections and how to adjust input gain for optimal signal levels from the source unit.
Explains the VOLUME control for audio level and FADER control for balancing front/rear speaker output.
Covers the SUBWOOFER control and specific EQ bands: SUB BASS, MID BASS, MID RANGE, and TREBLE.
Describes the function of the INPUT SELECTOR switch and the LED illumination indicator.
Details the FRONT/REAR HIGH PASS and SUBWOOFER LOW PASS outputs for amplifier connections.
Covers the STEREO MONO SELECTOR for subwoofer output and frequency switches for crossover adjustments.
Instructions for connecting the power harness, including +12V DC, REMOTE, and GROUND leads.
Provides essential guidance for connecting +12V DC, REMOTE, and GROUND wires securely to prevent damage.
Steps for selecting a mounting location, drilling, and securely mounting the unit to the vehicle's dashboard.
Guidance on connecting the head unit outputs to the equalizer inputs and equalizer outputs to amplifiers.
Lists detailed performance specifications for the equalizer and crossover unit, including frequencies and signal-to-noise ratio.
Details the one-year warranty, coverage, exclusions, and limitations of implied warranties.
To Next Page
General