AUTOTERM PLANAR-2D - Heater Controls; Kit

3
Heater Controls .
Controller PU-16M
 Starting the heater for an unlimited time.
 Selection of Power Control/Temperature Control.
 Setting of Ventilation mode.
 Indication of temperature settings.
 T
emperature indication
.
 Indication of a selected temperature sensor.
GSM-modem
 Start-up and Shutdown of the heater.
 Setting of operation time.
 Power Control/Temperature Control.

Setting of ventilation mode
.

T
emperature indication
.
 Indication of a selected temperature sensor
Remote Control
 Starting the heater for 2 hours.
 Heater operation at max. Power Control mode
Kit .
The standard kit contains:
- Controller PU-16M;
- Fuel Pump;
- Fuel Tank, Fuel Intake, T-fitting;
- Harnesses;
- Air Intake;
- Exhaust hose;
In addition to standard equipment, you can purchase and install a cab sensor and a
GSM modem.