AUTOTERM PU-16 User Manual

3
Controller PU-16 .
 heater start-up;

heater shutdown
;
 activation of the selected
mode;
 confirmation of the
selected menu item.
1 - 4-digit LED indicator (indication of
temperature, power or a fault code).
2 - LEDs (indication of operation
mode)
3 - control buttons
 selection of operation mode;
 selection of sensor;
 decreasing the desired setting
of temperature or heat output.
 ventilation mode ON/OFF;
 increasing the desired setting
of temperature or heat
output.
Application .
The functions of the Controller :
 Manual Start-up (for unlimited time) and Shutdown of the heater.
 Selection of Heat Control/Temperature Control operation mode.
 Activation of Ventilation mode.
 Indication of preset values for temperature or power.
 Indication of 1 of the 3 Temperature Sensors (installed in the heating unit, or in the
Controller, or remote, if installed in the driver's cab/compartment).
 Fault code indication in case of heater malfunction.

AUTOTERM PU-16 Specifications

General

Brand	AUTOTERM
Model	PU-16
Category	Controller
Language	English