autoXS AU315001 - User Manual

After Sales Support
1300 663 907
Model Number AU315001
Getting Started Guide
Mounting the Winch
Connecting the Winch
This guide is a reference only. Ensure you read the included instruction manual before using the
Auto XS® Boat Winch.
Consult your trailer manual to locate best position
to x the mounting plate.
Plug the input of the power lead into the power socket
located on the side of the boat winch.
The included mounting plate is designed for use with
U-bolts (sold separately). Select appropriate sized U-bolts
to suit your trailer before installation.
Connect the power lead to your car battery by securely clip-
ping the black clasp to the negative terminal of the battery,
then connect the red clasp to the positive terminal. Con-
nect the wired remote control to the remote control socket,
located on the side of the boat winch.
After the plate is securely mounted, align the base of
the boat winch with the three quick release mounting
bolts on the plate. Once inserted, slide forward and
ensure the winch is secure.
AU315001 12V BOAT WINCH
1
1
2
2
3
customercare@winplus.com.au

Summary

Mounting the Winch

Prepare Mounting Plate

Consult trailer manual for placement and select appropriate U-bolts for the mounting plate.

Attach Winch to Plate

Align winch base with mounting plate bolts and slide forward to ensure secure attachment.

Connecting the Winch

Connect Power Lead to Winch

Plug the input of the power lead into the power socket on the side of the boat winch.

Connect Power to Battery and Remote

Connect power lead to car battery terminals and remote control to the winch socket.

Using the Winch

Prepare for Operation

Ensure vehicle is in Park, engage handbrake, and use a wheel wedge before operating the winch.

Engage;Disengage Clutch

Release clutch counter-clockwise; re-tighten clockwise to engage the electric motor.

Load Attachment and Cable Retraction

Attach hook to load, start engine, and press remote to retract cable safely.

Storage

Remove and store the winch in a dry place when it is not in use.

autoXS AU315001 Specifications

General

Gear Ratio	153:1
Cable	Steel
Voltage	12V
Rated Line Pull	3150 lbs
Motor	12V DC
Load Capacity	3150 lbs
Rope Length	12 m
Rope Diameter	6 mm