Autronica BS-100 DYFI Manual

Fire alarm control panel BS-100 DYFI
For using the arrow keys, follow the instructions in "Operators Handbook"-BS-100.
Service needed,
call :
P-BS100/LX/A3, 980202
Operation
In the event of fire/prewarning:
1. Respond to your local "Fire alarm instruction".
2. The text display and the zone indicator indicates the
exact location of the alarm / prewarning.
3. Press SOUNDER SILENCE when the situation is under
control.
4. Press RESET when the situation is normal.
In the event of fault:
1. The text display indicates the nature of the fault.
2. Press SOUNDER SILENCE.
3. Make sure that the fault is corrected.
4. Press RESET after the fault has been corrected.
Operating buttons:
SOUNDER SILENCE: Stops all alarm devices.
MORE ALARMS: Scrolls all alarms (zone/address) in bottom line display.
RESET: Resets all alarms, prewarnings and faults.
Indicators:
Text display: Indicates the exact location (zone/address) of the alarms,
prewarnings and faults
FIRE: Red lamp, illuminates at fire alarm.
MORE ALARMS: Red lamp, illuminates when more alarms are present.
ZONE(S) STILL IN
ALARM COND.: Yellow lamp, illuminates when an address is
automatically disabled after system reset.
FUNCTION DISABLED: Yellow lamp, illuminates when parts of the system are
disabled.
FAULT: Yellow lamp, illuminates for any fault. Pulsating
light.
MAINS: Green lamp, illuminates in normal condition.
Normal condition: MAINS light is illuminated.

Autronica BS-100 DYFI Specifications

General

Brand	Autronica
Model	BS-100 DYFI
Category	Control Panel
Language	English