Universal Home Theater
Remote with DVR Controls
User’s Guide 15-305
Please read this user’s guide before using
your new remote.
2
2
3
3
4
4
5
5
6
6
7
7
8
8
Package contents
Features
Fully backlit keypad is easily visible
in the dark.
Integrated scroll wheel makes it
easy to navegate on-screen menus.
1 Install Batteries
Remove the battery cover and
insert two AAA batteries
(not included) by matching
the polarity symbols (+
/ –) marked inside, then
replace the battery cover.
b Battery Notes
Dispose of batteries promptly and properly.
Do not burn or bury them.
Use only fresh batteries of the required size
and type.
Do not mix old and new batteries, different
types of batteries (alkaline, or rechargeable),
or rechargeable batteries of different
capacities.
If you do not plan to use the remote for
more than one week, remove the batteries.
Batteries can leak chemicals that can
damage electronic parts.
2 Set up
You can set up the remote by using the
brand code for your device, performing
an automatic search, or performing a
manual search. Check the Code List to
locate the 3-digit code for your device.
Use the Brand Code
1. Power on the device.
2. Press SET and the device key
(TV, VCR/DVD, or SAT/CBL)
simultaneously. The red LED lights.
3. Enter the 3-digit code (for example,
451 or 489 for an Auvio TV). The
LED blinks after each number and
turns off if successful.
4. Press various keys to make sure
they work.
n Notes:
If the code number is incorrect, the red
LED blinks twice. Return to step 3 and try
another code.
If you’ve entered a code and some keys on
your new remote don’t work, try the next
3-digit code listed for your device.
If you want to quit during device setup,
press the device key or wait 10 seconds for
the remote to exit setup automatically.
Auto Search
If your device’s code isn’t listed in the
Code List, or your remote doesn’t
work as instructed in “Use the Brand
Code,” follow the steps below to
automatically search for your device.
1. Power on the desired device. If it is
a VCR, insert a tape.
2. Pointing the remote control toward
your device, press and hold SET
and the device key simultaneously
for at least 3 seconds.
3. The red LED blinks slowly while
the remote searches. The device
switches itself off when the code is
found.
4. Once the device turns off, press any
key (except SET) immediately to
confirm the code.
5. If the automatic search does not
find the code for your device, try
the steps under “Manual Search,”
which will take longer. Automatic
search stops after one search cycle,
approximately 18 minutes for TV,
20 minutes for DVD/VCR/DVR, 9
minutes around for satellite or cable,
and 13 minutes other devices.
n Notes:
Since action is required during automatic
search, you must stay with the device for the
duration of the process or you might miss the
code and have to repeat the process.
If you miss the code during the automatic
search, press SET to change search
direction to get the code quickly.
6. Press G to turn on the device and
check other remote functions.
Device keys - Select a device to control.
MUTE - Turn off the sound.
SET - Enter setup for the remote.
G - Turn on or off a selected device.
EXIT - Exit menu and go back to viewing.
edf g and OK
In MENU, works as UP, DOWN,
LEFT, RIGHT and OK.
In SETUP, works as cursor and
confirm settings.
Scroll Wheel
Use to select channels: turn clockwise
for CH+, and anti-clockwise for CH-.
Navigate menus.
VOL +/– Adjust the volume.
0-9 - Directly enter channels.
Control your VCR or DVD player.
These functions are the same as those
on the device’s original remote.
LEARN - Copy key functions
INPUT - Select the video inputs.
CC - Closed caption options.
ASPECT - Change viewing options (4:3
or 16:9)
SLEEP - Set the sleep timer.
PROG - Operate the program guide
function and secondary device menus.
GUIDE - Display the program guide for the
selected device.
PIP - Switch on/off Picture-In-Picture feature.
LAST -
Press to return to the last channel.
MENU
Display the menu for the selected device.
CH +/–
Select the next or previous channel.
- Confirm a setting.
Remote Control
User’s Guide
Code List
Quick Start
Access sub channels on a TV or receiver.
n Notes:
If some keys still don’t work properly, repeat
steps 2-4 to restart the search for a suitable
code.
To stop searching, press any key (except
SET) to quit search. The red LED turns off
and search stops.
During search, you can press SET to change
search direction from forward to backward
or vice versa.
Manual Search
1. Power on the desired device. If it is
a VCR, insert a tape.
2. Point the remote control toward
your device, then press SET and the
device key simultaneously. The red
LED lights.
3. Press G until the device turns off,
then press the appropriate device
key quickly to confirm the code.
4. Press G to turn the device back on.
5. Check the other function keys
(except G). If all the keys work
2/3
AAA
A
A
A
Color Keys
Functions for the four color keys are the same
as those on the device’s original remote.
To Next Page
Need help?
General