4
4
Pairing
1. Press and hold for about 2 seconds to switch on
your headphones. The headphones beeps, and the
Power / Pairing Indicator lights green briefly.
If the headphones have not been previously paired
with a device, they automatically enter pairing mode
and the Power / Pairing Indicator flashes blue
quickly.
If the headphones have been previously paired with
another device, press and hold for about 3 seconds
to switch off the headphones. The headphones beep,
and the Power / Pairing Indicator lights red briefly.
Then press and hold for about 5 seconds until the
Power / Pairing Indicator flashes blue quickly.
2. Turn on your audio device, activate its Bluetooth
function, and set it to search for Bluetooth devices.
3. Select AUVIO3300675 from the list of found devices.
4. If necessary, enter the passcode 0000 to pair and
connect the headphones to your device.
5. The Power / Pairing Indicator flashes blue slowly if
the headphones are paired.
nNote:
When the headphones try to connect to the last used
audio device, the Power / Pairing Indicator flashes
green slowly.
If the headphones are not connected to a device
within 10 minutes, they automatically turn off.
To Next Page
Loading...
