Need help?Do you have a question about the AUX Europe Series and is the answer not in the manual?
Explains model naming conventions and coding system.
Showcases visual models and types of indoor and outdoor units.
Details key features of outdoor units, including refrigerant and efficiency.
Highlights advantages of four-way cassette indoor units.
Describes features of ceiling and floor mounted indoor units.
Explains constant airflow and control board integration in duct units.
Technical specifications for cassette indoor units (12K-36K).
Technical specifications for ceiling/floor indoor units (18K-36K).
Technical specifications for duct indoor units (18K-36K).
Technical specifications for outdoor units (12K-30K).
Dimensional drawings for cassette indoor units (12K, 18K).
Dimensional drawings for ceiling/floor indoor units (18K-60K).
Dimensional drawings for duct indoor units (18K-30K).
Dimensional drawings for outdoor units (12K-60K).
Electrical diagram for cassette indoor units.
Electrical diagram for ceiling/floor indoor units.
Electrical diagram for duct indoor units.
Electrical diagram for outdoor units.
Specifies voltage and ambient temperature operating limits.
Provides coefficients to adjust capacity based on ambient temperature.
Details specifications and cautions for extended piping lengths.
Offers capacity adjustment coefficients for height differences.
Explains converting pipe bends/loops to equivalent straight pipe length.
Static pressure curves for 18K duct units.
Static pressure curves for 24K duct units.
Static pressure curves for 30K duct units.
Static pressure curves for 36K/42K duct units.
Static pressure curves for 48K/60K duct units.
Details available remote and wired controllers for indoor units.
Guides on setting indoor unit parameters via controllers.
Explains the optional room card functionality and setup.
Covers WiFi module installation, configuration, and app usage.
Exploded views for cassette indoor units.
Exploded view for 12K/18K cassette indoor units.
Exploded view for 24K cassette indoor units.
Exploded view for 36K-60K cassette indoor units.
Exploded views for ceiling/floor indoor units.
Exploded views for duct indoor units.
Exploded views for outdoor units.
Lists required spare parts and tools for installation.
Safety and location precautions for unit installation.
Installation procedures for cassette indoor units.
Installation procedures for ceiling/floor indoor units.
Installation guidelines for duct indoor units.
Installation requirements and spacing for outdoor units.
Covers piping specifications, selection, and connection.
Procedures for vacuuming and emptying the system.
Guidelines on pipe insulation methods and materials.
Instructions for adding refrigerant based on pipe length.
Precautions and specifications for electrical wiring.
Identification of components on outdoor unit PCBs.
Identification of components on indoor unit PCBs.
Lists and describes error codes for unit failures.
Troubleshooting guide for communication failures.
To Next Page
General