Timer
The SC MASTER 6/16 has a timer for periodic, time-controlled
starting of shows from CF card. The following menus allow you
to select the corresponding timer parameters.
AutoTimer
By activating the auto timer (Auto Timer= ON), SC MASTER
6/16 starts timer operation immediately after starting up. This
may come in handy for fixed installations running over a period
of several days. Set Auto Timer=OFF to switch off the timer.
ShowNumber (Show Number)
This menu serves for selecting a show (from 1 to 120) on the
CF card, which is to be started via a timer.
Timer Time
Here you can specify the interval, i.e. the period to expire
before the next show start. The value is entered in minutes
and seconds, i.e. a value for Timer Time= 0140:15 means 2
hours, 20 minutes and 15 seconds.
Entries in this menu can be made via the IR remote control
unit. The keys have the following functions:
IR remote control unit Menu function
PLAY key
ENTER
STOP key
ESC
Skip keys
and Keys Ï and Ð
SC Master 16 9BThe Menu Items • 89
To Next Page