Need help?Do you have a question about the Avady PANDuo pH Turboxy Cl T and is the answer not in the manual?
Covers general equipment warranty and sensor warranty extension details, including conditions and exclusions.
Guidelines for the safe and risk-free shipping and transportation of the pump.
Instructions on the correct and intended usage of the pump to ensure safety and reliability.
Identifies potential hazards and outlines essential safety rules for electrical equipment use.
Safety measures and recommendations for handling toxic or hazardous liquids during dosage.
Procedures and precautions for assembling and dismantling the pump unit.
Details the function and operation of each button on the device's control panel.
Identifies and explains the purpose of the various plugs and connectors on the device.
Provides advice on operating conditions, chemical compatibility, and specific product information.
Step-by-step guide for installing the device, including sensor preparation, connections, calibration, hydraulic setup, and completion.
Guide on how to adjust and set the desired pH level for the system.
Instructions for setting the desired chlorine level (Cl) for pool water treatment.
Explains operational principles and details proportional and fixed activation modes for dosing.
Overview of the main device settings, covering pH, Cl, System menus, and their configurations.
Configuration and management of the overdosing alarm feature to prevent excessive chemical addition.
Instructions on how to put the device into standby mode and exit it.
Describes the two methods for priming the pumps for correct operation.
Information on how the display backlight operates and how to activate it.
Troubleshooting for incorrect measurements and procedure for increasing Total Alkalinity (TAC).
Interprets various alarm messages and symbols displayed by the device.
Step-by-step guide for pairing the device with the AvadyConnect system.
Lists parts prone to wear and recommends replacement frequencies and codes.
Instructions for cleaning the TURBOXY probe electrode to ensure accurate chlorine measurements.
Care instructions for the pH electrode, including cleaning and potential replacement.
Detailed guide on how to remove and install a new peristaltic tube.
Provides procedures for winterizing the probe, device, and peristaltic tube for storage.
Lists chemicals that are recommended or not recommended for use with the device.
Guidelines for performing shock chlorination and its impact on the probe.
General| Brand | Avady |
|---|---|
| Model | PANDuo pH Turboxy Cl T |
| Category | Laboratory Equipment |
| Language | English |
To Next Page
