Avalanche! Original 500 User Manual

english
Assembly & Operating Manual
Avalanche! Original 500 (AVA500)
Avalanche! 750 (AVA750)
Avalanche! Premium Package (AVA1000)
ITEM PART # NAME QTY
1
AVA500-FR
FRAME RIGHT HAND
1
2
AVA500-FL
FRAME LEFT HAND
1
3
AVA500-SK
SLIDE KIT WITH WHEELS
1
4
AVA500-HFA
HANDLE FRAME ADAPTER
1
5
AVA500-FP
FIBER POLE – 4 FOOT
4
6
AVA500-HC
HANDLE COUPLER
3
7
AVA500-VEG
VINYL END GRIP – BLACK
1
8
NONE
NONE
0
9
SRD-HD
RAKE HEAD (AVA1000 ONLY)
1
10
UA100
UNIVERSAL ADAPTER (AVA1000 ONLY)
1
11
AVA500-SW
SLIDE WINDER *Optional *
1
GJENSTAND DEL # NAVN ANT.
1
AVA500-FR
RAMME, HØYRE HÅND
1
2
AVA500-FL
RAMME, VENSTRE HÅND
1
3
AVA500-SK
SKUFFEPLATE MED HJUL
1
4
AVA500-HFA
ADAPTER TIL HÅNDTAKSRAMME
1
5
AVA500-FP
FIBERSTANG - 4 FOT
4
6
AVA500-HC
HÅNDTAKSKOBLER
3
7
AVA500-VEG
VINYLHÅNDTAK – SORT
1
8
INTET
INTET
0
9
SRD-HD
RAKEHODE (BARE AVA1000)
1
10
UA100
UNIVERSAL-ADAPTER (BARE AVA1000)
1
11
AVA500-SW
SKUFFEFESTER * Valgfritt *
1
ASSEMBLY INSTRUCTIONS:
a. Remove all blue caps from orange cutter frames (1&2), discard after removing.
b. Connect right & left cutter frames (1&2) to “Y” frame adapter (4). (See “A”)
c. Attach slide kit with wheels (3) to right & left orange cutter frames (1&2)
 d. Tojoinhandles,connectrstberglasspole(5)to“Y”frameadapter(4),bypushingdownonthe
  snapbuttonandfastensecurely.Slidealuminumcoupler(6)intoendofberglasspoleuntilthe
snap buttons line up with the holes in the handle. (See “B”) Repeat for all additional poles.
 e. PlacetheblackVinylEndGrip(7)ontheendofthelastpole.
 f. (REMOVETHESLIDEWINDERBEFOREUSE!)Attach#11onrodbetweennutandwheel.
* Optional *
** Premium Package – to convert to the SnowRake!
 • Unsnapthehandleframeadapter(4)fromtheberglasspoles.(keeptheslidekit&cutterframes
attached to handle frame adapter.)
 • SnaptheUniversaladapter(10)totherstberglasspole&connecttherakehead(9).
Operating Instructions:
 a. Placethecutterframeatthelowerroofedgewiththeplasticslidehangingdown.Slowlyrollthe
cutter frame up the roof. The plastic slide will follow under the snow, the snow will break off into
blocks and slide down the plastic.
*(If resistance occurs, STOP, Readjust & repeat process)*
WARNING! Keep away from electrical wires. ** THIS PRODUCT DOES NOT REMOVE ICE DAMS **
US/Canada: Visit www.avalanche-snow.com Europe: Visit www.avalanche-snow.eu for Parts & Accessories for
your Avalanche!
Limited Warranty:
AvalancheManufacturingwarrantsthisequipmenttobefreefromdefectsinmaterialandworkmanshipundernormal
use.*THISPRODUCTDOESNOTREMOVEICEDAMS*Thiswarrantyisextendedtotheoriginalpurchaserfora
periodof6monthsfromthedateofpurchaseandisapplicableonlywhentheequipmentisassembledandoperated
inaccordancewithfactoryrecommendations.Thewarrantydoesnotextendtodamageorwearcausedbymisuse,
abrasion,corrosion,negligence,accident,faultyassemblyortamperinginamannertoimpairitsnormaloperation.
Because the plastic slide is subject to abrasion and wear in normal use, it is intended to be a disposable replacement
part.Andnowarrantyisgivenwithrespecttoit.
Return Policy:
Allreturnsmustbemadewithin30daysfromthedateofpurchase.Thereisa15%restockingfeethatwillbeapplied
toALLordersunlesscoveredbyourwarrantylistedabove.Nofreightchargeswillberefunded.
Return Procedure:
RequestsforareturnmustbeauthorizedthroughAvalanchepriortoreturningmerchandise.Pleasecallourtollfree
number1-800-378-3088forareturnauthorizationnumber.
6
3
4
5
4
3
8
4
2
1
11
7
9
10
SnowRake! Deluxe 20
Avalanche! Original, Drift Buster & Premium Package
Owner’s Manual
Assembly:
Operating Instructions:
The Avalanche Snow Remover may be operated in several different ways.
We recommend that you choose the operation which requires the shortest
handlelength, because any weighted tool at the end of a very long handle is
difficult to maneuver.
It’s usually only necessary to remove the first few feet of snow from the lower roof edge.
This should be done as soon as possible after a snowfall to prevent ice dams. Place the
cutter frame at the lower roof edge with the plastic slide hanging down over the roof
edge and slowly roll the cutter frame up the roof. The plastic slide will pull behind the
frame under the snow; the snow will break off in blocks and slide down the plastic off
the roof and onto the ground below. If any snow remains on the plastic, it will be removed
when you roll the cutter frame back down the roof. Reposition the cutter frame
at the lower roof edge for another pass.
Model 300/315 Parts Breakdown
A
Figure 2
Figure 1
14
Warning!
Keep away from electrical wires.
Avalanche! Original, Drift Buster & Premium Package
1. Unpack the Avalanche Snow Remover carton and parts. Check for any missing
parts. Refer to the parts list and the assembly diagrams.
2. The plastic slide should be already on the rod with the slide holder when you
receive your unit from the factory. The NEW Slide Winder part that assists in winding
up the slide material will come in bag with slide kit.
REMOVE SLIDE WINDER BEFORE USE!
Should you need to replace the slide, remove the plastic slide holder from the axle
and wrap the plastic slide around the axle once. Then snap the slide holder over the
plastic and axle to hold the plastic on the axle. If during operation the plastic slide
should catch on the nails or obstructions in the roof and tear, simply cut off the plastic
below the rip, re-wrap, around axle, snap on the slide holder and return to work.
3. To Assemble:
a. Remove all blue caps from orange cutter frames (1 & 2), discard after removing.
b. Connect right & left cutter frames (1 & 2) to frame adapter (4). (See Figure 1)
(Note: If assembling Drift Buster, now insert shield (8))
c. Attach slide kit with wheels (3) to right and left orange cutter frames (1 & 2).
d. To join handles, connect first fiber glass pole (5) to frame adapter (4), by
pushing down on the snap button and fasten securely. Slide aluminum coupler (6)
into end of fiber glass pole until the snap buttons line up with the holes in the handle.
(Figure 2) Repeat this step for all additional poles.
e. Place the black Vinyl End Grip (7) on the end of the last pole
.
**FOR PREMIUM PACKAGE**
How to convert the Avalanche! Original to a SnowRake!
• Unsnap the handle frame adapter (AVA500-HFA) from the fiberglass poles(you can keep the slide kit
& cutter frames attached to handle frame adapter)
• Snap the universal adapter(UA100) to the first fiberglass pole & connect the rake head(SRD-HD)
Please visit our website at www.avalanche-snow.com
for additional parts and accessories.
ITEM PART # NAME QTY
1 AVA500-FR FRAME RIGHT HAND 1
2 AVA500-FL FRAME LEFT HAND 1
3 AVA500-SK SLIDE KIT-WITH WHEELS 1
4 AVA500-HFA HANDLE FRAME ADAPTER 1
5 AVA500-FP FIBER POLE - 4 FOOT 4
6 AVA500-HC HANDLE COUPLER 3
7 AVA500-VEG VINYL END GRIP - BLACK 1
8 NONE NONE
0
9 SRD-HD RAKE HEAD (AVA1000) 1
10 UA100 UNIVERSAL ADAPTER
(AVA1000) 1
11 AVA500-SW SLIDE WINDER 1
6
6
5
5
5
5
33
5
1
4
2
PREMIUM PACKAGE
PARTS
9
10
11
B
Avalanche!ProductsbyRhinoManufacturing,Inc.
US/Canada:TollFree:800-378-3088
Email:sales@avalanche-snow.com\Web:www.avalanche-snow.com
Europe:0114793059734Website:www.avalanche-snow.eu
Avalanche!ProduitsparRhinoManufacturing,Inc.
US/Canada:Appelgratuit:800-378-3088
E-mail:sales@avalanche-snow.com\Web:www.avalanche-snow.com
Europe:0114793059734SiteWeb:www.avalanche-snow.eu
Avalanche!ProduktevonRhinoManufacturing,Inc.
USA/Kanada:Gebührenfrei:800-378-3088
E-Mail:sales@avalanche-snow.com\Web:www.avalanche-snow.com
Europa:0114793059734Webseite:www.avalanche-snow.eu
Avalanche!-ProdukteravRhinoManufacturing,Inc.
US/CanadaogTollfri:800-378-3088
E-post:sales@avalanche-snow.com/Nettside:www.avalanche-snow.com
Europa:0114793059734Nettside:www.avalanche-snow.eu

Avalanche! Original 500 Specifications

General

Brand	Avalanche!
Model	Original 500
Category	Snow Blower
Language	English

Summary

Assembly Instructions

Premium Package Conversion to SnowRake

Instructions for converting the Avalanche! to its SnowRake configuration using the premium package.

Operating Instructions

Roof Snow Removal Technique

How to use the cutter frame to remove snow blocks from the roof edge.

Limited Warranty

Warranty Coverage and Exclusions

Details what the warranty covers, its duration, and conditions for defects in material and workmanship.

Return Policy

Return Procedure and Authorization

Outlines the process for authorized returns, including time limits and restocking fees.