To Next PageTo Next Page
Need help?Do you have a question about the Avalon Indoor Fireplace and is the answer not in the manual?
Details on model, serial number, purchase date, and warranty card submission.
Details on heating capacity, burn rate, and maximum burn time.
Provides physical measurements and clearance requirements for the unit.
Lists electrical ratings, amps, and wattage during operation and start-up.
Specifies approved fuel types for the pellet heater.
States EPA exemption and testing information for emissions.
Crucial warnings and checks before starting the installation process.
Lists all components included with the pellet heater for installation.
Outlines different fireplace types and outside air compatibility for installation.
Guidance on preparation, dealer involvement, and initial burn-in for paint curing.
Specifies minimum clearance and size requirements for fireplace installation.
Instructions on adjusting the hopper height for different fireplace sizes.
Details required clearances from combustibles for safe operation.
Specifies dimensions and placement rules for mantels above the unit.
Defines the non-combustible hearth extension needed in front and on sides.
Specifies non-combustible facing extension requirements above the hopper lid.
Guidelines for positioning the insert within the fireplace cavity.
Instructions on installing the vent system, including type, distance, and termination.
Specific safety and installation guidelines for mobile home use.
Details on connecting and routing the outside air intake for combustion.
Instructions for installing the baffles within the firebox for proper airflow.
Guidance on adjusting the air restrictor for optimal burn performance.
Steps for installing the decorative surround panels and the main circuit board.
Specific instructions and diagrams for installing the unit into a masonry fireplace.
Specific instructions and diagrams for installing the unit into a metal fireplace.
Emphasizes reading the manual and proper heater usage for safety.
Identifies and describes the main controls like the restrictor and control panel.
Guides on initial startup, paint curing, and auger priming.
Instructions on how to properly fill the pellet hopper.
Explains the Manual and Auto modes for controlling the heater.
Describes the start-up sequence that occurs when switching modes.
Detailed explanation of manual operation, starting, and shutting down.
Detailed explanation of thermostat-controlled operation, heat adjustment.
Guidance on adjusting airflow for optimal combustion and firepot cleanliness.
Instructions on how to change the fan speed using the control panel.
Explains the automatic sequence the stove follows when starting.
Describes the function of the auger indicator light.
Explains the indicator light and provides a troubleshooting chart for codes.
Details how the heater behaves and what to do during a power outage.
Guidelines and precautions for burning a mixture of pellets and corn.
Procedures for routine checks and cleaning performed during use.
How to identify and address clinker formation in the firepot.
Step-by-step guide on how to clean the firepot.
Instructions on how to safely open the heater's door for access.
Tasks to perform on a weekly basis or after consuming 5 bags of pellets.
Guide for inspecting and emptying ash components and baffles.
Method for cleaning the viewing glass for better visibility and heat.
Steps to brush ash into the ashpan for proper disposal.
Major maintenance tasks recommended annually or after burning a ton of fuel.
Instructions for cleaning the vertical section of the exhaust duct.
Procedures for cleaning the main exhaust duct system.
Steps for cleaning the exhaust blower motor and housing.
Guide for inspecting and cleaning the pellet vent system.
Information on checking and ensuring the door gasket creates an airtight seal.
How to check and ensure the door is correctly aligned for proper sealing.
Detailed steps for adjusting door hinges and latches for proper fit.
Procedures for identifying and sealing air leaks in critical areas.
A list of available replacement parts for the appliance.
Instructions for installing and connecting an optional thermostat.
Information about the optional Zero Clearance Kit for framing installation.
Details on model, serial number, purchase date, and warranty card submission.
Details on heating capacity, burn rate, and maximum burn time.
Provides physical measurements and clearance requirements for the unit.
Lists electrical ratings, amps, and wattage during operation and start-up.
Specifies approved fuel types for the pellet heater.
States EPA exemption and testing information for emissions.
Crucial warnings and checks before starting the installation process.
Lists all components included with the pellet heater for installation.
Outlines different fireplace types and outside air compatibility for installation.
Guidance on preparation, dealer involvement, and initial burn-in for paint curing.
Specifies minimum clearance and size requirements for fireplace installation.
Instructions on adjusting the hopper height for different fireplace sizes.
Details required clearances from combustibles for safe operation.
Specifies dimensions and placement rules for mantels above the unit.
Defines the non-combustible hearth extension needed in front and on sides.
Specifies non-combustible facing extension requirements above the hopper lid.
Guidelines for positioning the insert within the fireplace cavity.
Instructions on installing the vent system, including type, distance, and termination.
Specific safety and installation guidelines for mobile home use.
Details on connecting and routing the outside air intake for combustion.
Instructions for installing the baffles within the firebox for proper airflow.
Guidance on adjusting the air restrictor for optimal burn performance.
Steps for installing the decorative surround panels and the main circuit board.
Specific instructions and diagrams for installing the unit into a masonry fireplace.
Specific instructions and diagrams for installing the unit into a metal fireplace.
Emphasizes reading the manual and proper heater usage for safety.
Identifies and describes the main controls like the restrictor and control panel.
Guides on initial startup, paint curing, and auger priming.
Instructions on how to properly fill the pellet hopper.
Explains the Manual and Auto modes for controlling the heater.
Describes the start-up sequence that occurs when switching modes.
Detailed explanation of manual operation, starting, and shutting down.
Detailed explanation of thermostat-controlled operation, heat adjustment.
Guidance on adjusting airflow for optimal combustion and firepot cleanliness.
Instructions on how to change the fan speed using the control panel.
Explains the automatic sequence the stove follows when starting.
Describes the function of the auger indicator light.
Explains the indicator light and provides a troubleshooting chart for codes.
Details how the heater behaves and what to do during a power outage.
Guidelines and precautions for burning a mixture of pellets and corn.
Procedures for routine checks and cleaning performed during use.
How to identify and address clinker formation in the firepot.
Step-by-step guide on how to clean the firepot.
Instructions on how to safely open the heater's door for access.
Tasks to perform on a weekly basis or after consuming 5 bags of pellets.
Guide for inspecting and emptying ash components and baffles.
Method for cleaning the viewing glass for better visibility and heat.
Steps to brush ash into the ashpan for proper disposal.
Major maintenance tasks recommended annually or after burning a ton of fuel.
Instructions for cleaning the vertical section of the exhaust duct.
Procedures for cleaning the main exhaust duct system.
Steps for cleaning the exhaust blower motor and housing.
Guide for inspecting and cleaning the pellet vent system.
Information on checking and ensuring the door gasket creates an airtight seal.
How to check and ensure the door is correctly aligned for proper sealing.
Detailed steps for adjusting door hinges and latches for proper fit.
Procedures for identifying and sealing air leaks in critical areas.
A list of available replacement parts for the appliance.
Instructions for installing and connecting an optional thermostat.
Information about the optional Zero Clearance Kit for framing installation.
General| Brand | Avalon |
|---|---|
| Model | Indoor Fireplace |
| Category | Indoor Fireplace |
| Language | English |
