Do you have a question about the Avalon U5 and is the answer not in the manual?
Highlights include discrete Class A path, tone shaping, headphone output, and ground lift.
Guidance on power selection and using the boost control for gain adjustment.
Six frequency curves for musically enhanced sonic character with graphical representations.
Provides a gentle roll-off in upper octaves to eliminate noise and buzz.
Bypasses front input, selects rear speaker jack; maximum 400W power input.
Illuminates when output signal reaches -2dB at line out XLR, indicates signal presence.
Selects thru jack for boost/tone path, normals passive input when not selected.
Engages passive tone-bank; adjust boost if loudness drop occurs.
100% discrete Class A design with switched 3dB gain steps up to +32dB.
Max input +24dBu, speaker input 400W; max output +28dBu balanced.
Response 5Hz-100kHz (+/-0.5dB), Distortion THD/IMD 0.05% at +10dB.
Set at -3dB at 1.8kHz with a minimum phase design.
Details instrument types for each of the six tone selector settings.
Selectable AC supply (100-240V), 20W max; dimensions and weight provided.
Highlights include discrete Class A path, tone shaping, headphone output, and ground lift.
Guidance on power selection and using the boost control for gain adjustment.
Six frequency curves for musically enhanced sonic character with graphical representations.
Provides a gentle roll-off in upper octaves to eliminate noise and buzz.
Bypasses front input, selects rear speaker jack; maximum 400W power input.
Illuminates when output signal reaches -2dB at line out XLR, indicates signal presence.
Selects thru jack for boost/tone path, normals passive input when not selected.
Engages passive tone-bank; adjust boost if loudness drop occurs.
100% discrete Class A design with switched 3dB gain steps up to +32dB.
Max input +24dBu, speaker input 400W; max output +28dBu balanced.
Response 5Hz-100kHz (+/-0.5dB), Distortion THD/IMD 0.05% at +10dB.
Set at -3dB at 1.8kHz with a minimum phase design.
Details instrument types for each of the six tone selector settings.
Selectable AC supply (100-240V), 20W max; dimensions and weight provided.
| Power Supply | Internal |
|---|---|
| Channels | 1 |
| Power Source | AC |
| Maximum Output Level | +30dBu |
| Dimensions | 8.5 x 3.5 x 10 inches |
| Inputs | 1 x XLR, 1 x 1/4" |
| Outputs | 1 x XLR |
| THD + N | Less than 0.5% |