Need help?Do you have a question about the Avalon V5 and is the answer not in the manual?
Details the discrete, high-voltage, Class A topology, gain ranges for line, instrument, and microphone inputs.
Specifies connector types (XLR, TRS) and their configurations for various audio signals.
Lists key performance metrics including output levels, noise, distortion, and frequency response.
Covers VU meter, signal LED, tone selector, polarity reverse, AC power, fuse, dimensions, and weight.
Highlights 100% discrete, high-voltage, Class A amplifiers for maximum dynamic range and +30dB headroom.
Features a Hi-Z, 10,000,000 ohm Instrument DI input for invisible 'Zero-Loading' on instruments.
Includes a wide-range, premium, low-ratio transformer and dual impedance selector for different mic types.
Details passive TONE BANK™ for custom filtering and a Hi-Cut passive FILTER for eliminating buzz.
Covers wide-range VU meter, dual color LED peak meters, and a high-power personal headphone output.
Mentions high-current, DC coupled output drivers, sealed relay switching, and low noise power supply.
Details the AC input, Earth Lift, Line Out, Thru Out, Isolated Out, Line In, Phones Out, and Mic Input connectors.
Explains how to select local supply voltage (115v/230v) and details the fuse specifications.
Describes the function of controls like BOOST, SIGNAL LED, PHASE REV switch, PAD switch, and Input Mode selector.
Details the INSTRUMENT & DI input, MIC input, and the function of the PAD switch for gain adjustment.
Explains the VU meter range (-30dB to +18dB) and the function of the Hi Cut switch for noise reduction.
Describes the POWER LED status (blue/red for +48v) and the TONE control's ten passive filter selections.
Presents graphs illustrating the frequency response shapes of the ten passive TONE-BANK™ filters.
Details selecting between LINE, INSTRUMENT-DI, MIC Hi-Z, MIC Lo-Z inputs and a warning for +48v switching.
Details the discrete, high-voltage, Class A topology, gain ranges for line, instrument, and microphone inputs.
Specifies connector types (XLR, TRS) and their configurations for various audio signals.
Lists key performance metrics including output levels, noise, distortion, and frequency response.
Covers VU meter, signal LED, tone selector, polarity reverse, AC power, fuse, dimensions, and weight.
Highlights 100% discrete, high-voltage, Class A amplifiers for maximum dynamic range and +30dB headroom.
Features a Hi-Z, 10,000,000 ohm Instrument DI input for invisible 'Zero-Loading' on instruments.
Includes a wide-range, premium, low-ratio transformer and dual impedance selector for different mic types.
Details passive TONE BANK™ for custom filtering and a Hi-Cut passive FILTER for eliminating buzz.
Covers wide-range VU meter, dual color LED peak meters, and a high-power personal headphone output.
Mentions high-current, DC coupled output drivers, sealed relay switching, and low noise power supply.
Details the AC input, Earth Lift, Line Out, Thru Out, Isolated Out, Line In, Phones Out, and Mic Input connectors.
Explains how to select local supply voltage (115v/230v) and details the fuse specifications.
Describes the function of controls like BOOST, SIGNAL LED, PHASE REV switch, PAD switch, and Input Mode selector.
Details the INSTRUMENT & DI input, MIC input, and the function of the PAD switch for gain adjustment.
Explains the VU meter range (-30dB to +18dB) and the function of the Hi Cut switch for noise reduction.
Describes the POWER LED status (blue/red for +48v) and the TONE control's ten passive filter selections.
Presents graphs illustrating the frequency response shapes of the ten passive TONE-BANK™ filters.
Details selecting between LINE, INSTRUMENT-DI, MIC Hi-Z, MIC Lo-Z inputs and a warning for +48v switching.
To Next Page
General