SAFETY, INSTALLATION AND OPERATION MANUAL
AVANCIS POWERMAX
®
PHOTOVOLTAIC MODULES
10
©2021 | AVANCIS GmbH | Solarstraße 3 | 04860 Torgau | Germany | service@avancis.de | www.avancis.de | February 2021
Content page
General Information 11
Handling Safety 11
Installation Safety 11
Fire Safety 12
Mechanical Installation 12
Electrical Installation 12
Grounding of Back Rails 13
Mounting 13
Operation 14
Disclaimer of Liability 14
WARNING! ELECTRICAL EQUIPMENT
AVANCIS photovoltaic (PV) modules are designed for outdoor use to produce direct current (DC) electrical energy
from sunlight. This manual provides very important safety, installation and operating information. Please make sure
you are familiar with this information before handling, installing and operating the modules. Avoid all hazards when
handling, installing and operating PV modules.
The entire PV system must be designed,
installed and commissioned by a licensed
and qualified electrotechnical profes-
sional unless local codes determine oth-
erwise. Follow all applicable PV system
design guidelines, because these guide-
lines are not covered by this document.
AVANCIS recommends use of electrical
and mechanical components and tools
suitable and qualified for use in PV sys-
tems. Installation and operation of these
components are also not covered by this
document.
Edition:
2.1, February 2021
Please make sure you follow precisely the
instructions being given by the suppliers
of these components.
PV modules with a suspected problem
should be removed from the PV system
by a qualified person and be returned to
AVANCIS for inspection and subsequent
actions as described in the AVANCIS
WARRANTY FOR PHOTOVOLTAIC MOD-
ULE(S).
To Next Page
Loading...