Avangarde TBWC-44SF - User Manual

Questions and Answers

V
Vincent GomezAug 16, 2025
Why is my Avangarde TBWC-44SF Wine Cooler temperature too warm?
- A
  April CarterAug 17, 2025
  Several factors can cause your Avangarde Wine Cooler to be too warm. The temperature control might be set too warm; if so, adjust it to a cooler setting and allow several hours for the temperature to stabilize. Also, opening the door too often or for extended periods can increase the temperature. Ensure the door is completely closed and that the door gasket seals properly. If the unit was recently disconnected, it requires about 4 hours to cool down completely.
A
Anita SheppardAug 19, 2025
What to do if my Avangarde Wine Cooler is vibrating?
- R
  Robert JonesAug 19, 2025
  If your Avangarde Wine Cooler is vibrating, first, make sure that the appliance is on a level surface. If it continues, ensure the appliance isn't touching the wall and re-level it. If these steps don't resolve the issue, turn off the appliance, unplug it, and contact customer service.
E
ejonesAug 22, 2025
What to do if my Avangarde TBWC-44SF Wine Cooler is not operating?
- D
  David TurnerAug 22, 2025
  If your Avangarde Wine Cooler isn't operating, first check if it's properly plugged in. Also, verify that the circuit breaker hasn't tripped or a fuse blown.
D
Dawn RodriguezAug 25, 2025
Why is there moisture inside my Avangarde Wine Cooler?
- J
  Jessica SmithAug 26, 2025
  Moisture inside your Avangarde Wine Cooler can be due to a door that is slightly open, being opened too often, or not sealing properly. Try to open the door less frequently.
M
Michael BrownAug 28, 2025
Why is my Avangarde Wine Cooler temperature too cold?
- A
  Alexandria BishopAug 28, 2025
  If the temperature inside your Avangarde Wine Cooler is too cold, the temperature control might be set too cold. Adjust the control to a warmer setting and allow several hours for the temperature to stabilize.
K
Kimberly MoralesAug 30, 2025
Why is there moisture on the outside of my Avangarde TBWC-44SF?
- N
  Nicholas LongAug 30, 2025
  Moisture forming on the outside of your Avangarde Wine Cooler is likely because the door is slightly open, allowing cold air from inside to meet warm, moist air from outside.
R
Randy RobertsonSep 2, 2025
What does “HH” mean on my Avangarde TBWC-44SF Wine Cooler?
- A
  Anita JohnstonSep 2, 2025
  The “HH” error code flashing on your Avangarde Wine Cooler indicates that the temperature sensor of zone>37°.
T
Teresa SalazarSep 5, 2025
What does “LL” mean on my Avangarde Wine Cooler?
- J
  Jeffrey SparksSep 5, 2025
  The “LL” error code flashing on your Avangarde Wine Cooler indicates that the temperature sensor of zone
J
John WilliamsSep 8, 2025
What does “E1” mean on my Avangarde Wine Cooler?
- E
  Edward WilsonSep 8, 2025
  The “E1” error code flashing on your Avangarde Wine Cooler indicates that the temperature sensor is failure in corresponding zone.
J
James LeeSep 10, 2025
What does “E2” mean on my Avangarde TBWC-44SF?
- Y
  Yolanda BradfordSep 12, 2025
  The “E2” error code flashing on your Avangarde Wine Cooler indicates that the defrost sensor (coil sensor) is failure in corresponding zone.

Avangarde TBWC-44SF Specifications

General

Brand	Avangarde
Model	TBWC-44SF
Category	Wine Cooler
Language	English

Avangarde TBWC-44SF - User Manual

Table of Contents

Questions and Answers

Avangarde TBWC-44SF Specifications