EasyManua.ls Logo

Avanos MIC-KEY G User Manual

Avanos MIC-KEY G
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
STEP 2
FLUSH
SAFETY TIPS
Always wash your hands thoroughly with warm,
soapy water before touching the feeding tube.
Avoid puncturing or tearing any part
of the tube or extension sets.
CLEANING AND CARING FOR STOMA SITE
Clean the skin around and under your MIC-KEY* G
feeding tube daily using:
Mild soap and water
A soft, lint-free cloth or cotton tipped applicator
MIC-KEY* G TUBE & PORT CARE
! Carefully rotate your MIC-KEY* G feeding tube 360° plus
a ¼ turn before cleaning to help prevent the tube from
sticking to the skin.
Clean the external portion of the feeding tube:
Be careful not to pull or manipulate the tube excessively.
Make sure both your tube and stoma are kept clean and dry.
TUBEFED.COM
QUICK START GUIDE
MIC-KEY* G Feeding Tube
Enteral Feeding as easy as 1 2 3
STEP 1
ATTACH
STEP 3
BEGIN
To start, attach the MIC-KEY*
G Extension Set into the
MIC-KEY* G feeding port by
matching the black lines on the
extension set and feeding port.
Push the extension set down
rmly and “lock” it into place
by turning the connector
CLOCKWISE until you feel a
slight resistance (approximately
three-quarters turn).
! DO NOT turn the connector past
the stop point!
! It is important to keep the
extension set “locked” into place
during feeding.
Next, ush your MIC-KEY* G
Extension Set with water.
Now begin enteral feeding.
For bolus feeding, attach a
bolus syringe lled with your
preferred nutrition.
For continuous feeding,
attach a feeding set to a
feeding pump with your
preferred nutrition in the bag.
Continuous
Extension Set
ENFit
®
Continuous
Extension Set
ENFit
®
Bolus
Extension Set
Bolus
Extension Set
Use either extension set to ush.
CHECK YOUR FILL VOLUME BY TUBE SIZE
Use sterile or distilled water to inflate balloon.
! DO NOT over inate balloon. Over ination may increase
the risk of balloon damage.
Size Fill Volume Recommended Fill Volume Max Fill Volume
12 Fr ml 3 ml 5 ml
14 Fr ml 5 ml 10 ml
16 Fr ml 5 ml 10 ml
18 Fr ml 5 ml 10 ml
20 Fr ml 5 ml 10 ml
24 Fr ml 5 ml 10 ml
Cleaning and Caring for the MIC-KEY* G Tube and Stoma Site
Question and Answer IconNeed help?

Do you have a question about the Avanos MIC-KEY G and is the answer not in the manual?

Avanos MIC-KEY G Specifications

General IconGeneral
BrandAvanos
ModelMIC-KEY G
CategoryMedical Equipment
LanguageEnglish

Summary

MIC-KEY G Feeding Tube: Quick Start Guide

Step 1: Attach the Extension Set

Attach the MIC-KEY G Extension Set by matching lines and locking the connector clockwise.

Step 2: Flush the Extension Set

Flush your MIC-KEY G Extension Set with water using either extension set.

Step 3: Begin Enteral Feeding

Begin enteral feeding by attaching a bolus syringe or feeding pump.

Cleaning and Caring for Tube and Stoma Site

Guidelines for cleaning the feeding tube, port, and stoma site.

Safety Tips for Tube Use

Always wash hands and avoid puncturing or tearing the tube or extension sets.

Stoma Site Cleaning and Care

Clean the skin around and under the tube daily using mild soap and water.

Tube and Port Care

Rotate the tube 360° plus 1½ turn before cleaning to prevent sticking.

Check Fill Volume by Tube Size

Use sterile or distilled water to inflate the balloon, do not overinflate.

Using the MIC-KEY G Extension Set

Connecting the Extension Set

Insert and lock the extension set into the feeding port by matching lines and turning clockwise.

Disconnecting the Extension Set

Disconnect by rotating counter-clockwise, then cap the feeding port securely.

Extension Set Availability

MIC-KEY Continuous and Bolus Extension Sets are available in various lengths and ENFit options.

Replacing the MIC-KEY G Feeding Tube

When to Replace the Feeding Tube

Replace if there is weight change, tube pinching, looseness, discomfort, or immobility.

Tips for Feeding Tube Success

General Feeding Tube Tips

Use correct equipment, extension sets, syringes, and sterile water for balloon inflation.

Stoma and Tube Fit

The external base should rest 1-2 mm above skin; contact clinician if fit is poor.

Anti-Reflux Valve Care

Keep the anti-reflux valve clean; do not insert medication directly to avoid damage.

Related product manuals