AVANT 735 2020 - Manuals of attachments; Compatibility of attachments

Working with attachments Avant 735
86
.
Manuals of attachments
DANGER
Attachments can create significant risks that are not
covered by this Operator's manual of the loader.
Make sure you hav
e all attachments manual available.
Wrong use of an attachment can cause serious injuries or
death.
Each attachment is accompanied by its own respective
Operator’s Manual. The manual will show important
information related to safety, and how to attach, use
, and
maintain each attachment correctly.
WARNING
Risk of injuries from incompatible attachments -
Make sure attachment is intended
to be used with this loader model. Wrong type of attachment, poor lo
cking of the
attachment, or wrong technical charac
teristics of coupling brackets can cause hazards
that are not taken into account by design of the loader or the individual attachment. Never
use other than original Avant attachments and brackets.
Third party manufacturers of attachment must carry out deta
iled engineering and risk
assessment to ensure safety, performance, and reliability of the combination of the loader
and the attachment. Consult your Avant dealer if you are unsure about the compatibility
of the equipment with your Avant loader.
Compatibility of attachments
Use only Avant attachments that have been designed for your loader model. Any attachment that is fitted to the
loader must be designed to be used specifically with Avant 735, and this must be stated in the operator's manual
of the attachment. The manufacturer of the attachment is responsible for evaluating the risks related to coupling
the attachment and using it with this loader model. Do not any attachment if the manufacturer of the attachment
has not declared its compatibility with this loader model in writing.
. ..
Check max. allowed hydraulic oil flow for the attachment. Adjust the speed of the
hydraulic pump so that the output flow is suitable for the work and the attachment
. See
page 37.
Notice that some third party attachments may have hydraulic oil that is not intended to
mixed with the oil in the hydraulic oil of the loader. Flushing of the hydraulic oil ci
rcuit of
the attachment may be necessary before cou
pling to the loader. Incompatible oils can
cause wearing of hydraulic pumps and motors.