User Manual
www.AvantcoEquipment.com 5
BEFORE USING YOUR OVEN
Before cooking anything in your oven for the rst me, please follow these simple instrucons:
Using a small amount of detergent, wash the handle and roasng racks with soapy water. (NOTE: Do not use
a spray or abrasive polishing agent.) Gently wipe down interior walls with a damp cloth. While washing this
unit, do not to touch the electric heang element. Do not soak the inside of the oven with water.
Aer washing and thoroughly drying the surfaces noted above, place the roasng racks back inside the oven.
Close the oven door and preheat the oven to its highest temperature seng for 5 minutes.
Turn o the heang elements and open the oven door in order to remove any smoky residue from inside the
oven. The heang elements are well lubricated and this inial use will help burn o the extra grease. A
light amount of smoke is normal during this process.
Using Your Oven
To start your oven, you need to turn on the temperature dial to set your desired cooking
temperature, and turn on the mer dial to set the cooking me.
CAUTION: During the baking process, make sure that no metal accessory comes in contact with
the electric heang elements.
CAUTION: Foods baked in this oven will be hot. Wear protecve hand coverings when reaching
into oven to retrieve food.
Typical Operation Sequence
ACTION RESULT
Plug in your oven
Power is connected but power light will go on aer
turning the temperature dial
Adjust temperature control knob
Heang indicator light comes on; heang elements
begin to heat up
Temperature light shuts o Oven has reached desired temperature
Load product into oven Product will begin to cook
Set mer to desired cook me between 0-120 min Timer starts ming down
Timer reaches zero Timer chimes
Unload oven
Product will be cooked/hot; use cauon removing it
from the oven
To Next Page
Loading...