To Next PageTo Next PageHow to troubleshoot no power issue in Avantco RBD-32 Juicer?
If your Avantco Juicer has no power, first ensure the plug is properly inserted into the mains socket. Then, check that the main switch is in the “I” position. If the issue persists, the power cord or the main switch might be broken and need to be replaced.
Why is my Avantco Juicer not cooling properly?
If your Avantco Juicer is not cooling, several factors could be at play. A gas leak in the cooling circuit might be the cause, requiring you to find the leak, filter it out, and recharge the cooling circuit. Alternatively, the condenser could be clogged, so cleaning the condenser might solve the problem. A burnt fan motor would need replacement. Finally, ensure there is sufficient airflow around the machine, increasing the distance from obstacles or heat sources if needed.
What to do if the compressor does not start in Avantco RBD-32?
If your Avantco Juicer's compressor isn't starting, the main switch might be broken and require replacement. Alternatively, the compressor protector or compressor relay could be faulty and need replacing. In some cases, the compressor motor itself is broken, necessitating a motor replacement.
Why is only one tank not cooling in my Avantco RBD-32?
If one tank of your Avantco Juicer isn't cooling, it could be due to several reasons. There might be a gas leak in the cooling circuit, which requires locating and fixing the leak, filtering it out, and recharging the circuit. Another possibility is a clogged condenser, which needs cleaning. Insufficient airflow around the machine could also be the problem, so increase the distance between the juicer and any obstacles or heat sources. Additionally, check for a clogged tube in the cooling circuit, which would need to be cut, cleared of the clog, and the circuit recharged. Finally, a clogged filter could be the cause, requiring a filter replacement.
What causes the mixing paddles to stop working in Avantco RBD-32?
If the mixing paddles in your Avantco Juicer aren't working, it's likely that the mixing motor is broken and needs to be replaced.
Essential safety measures for operating electrical appliances, including supervision and avoiding damage.
Guidelines for safe transport, handling, and unpacking to prevent damage and ensure proper operation.
Lists and illustrates all parts of the juice dispenser, including their numbers and names.
Provides technical details such as capacity, voltage, power, dimensions, and refrigerant for different models.
Guidelines for placing the appliance on a stable surface with adequate clearance for ventilation.
Instructions for assembling components like the waste liquid container and taps.
Critical checks for grounding, voltage compliance, and proper outlet usage before plugging in.
Steps for mixing beverages and filling the tanks, including level guidelines and temperature considerations.
How to set and adjust the desired temperature for each bowl using the digital control panel.
Detailed steps for cleaning tanks, lids, taps, and other parts using mild soap and water. Avoid abrasive materials.
Instructions for safely disassembling tanks and replacing rubber gaskets for maintenance.
Identifies electrical components and their functions within the unit's wiring schematic.
Guides users through diagnosing and resolving common problems like lack of power or cooling issues.
Outlines the warranty period, conditions for coverage, and specific items or situations that are not covered.
Essential safety measures for operating electrical appliances, including supervision and avoiding damage.
Guidelines for safe transport, handling, and unpacking to prevent damage and ensure proper operation.
Lists and illustrates all parts of the juice dispenser, including their numbers and names.
Provides technical details such as capacity, voltage, power, dimensions, and refrigerant for different models.
Guidelines for placing the appliance on a stable surface with adequate clearance for ventilation.
Instructions for assembling components like the waste liquid container and taps.
Critical checks for grounding, voltage compliance, and proper outlet usage before plugging in.
Steps for mixing beverages and filling the tanks, including level guidelines and temperature considerations.
How to set and adjust the desired temperature for each bowl using the digital control panel.
Detailed steps for cleaning tanks, lids, taps, and other parts using mild soap and water. Avoid abrasive materials.
Instructions for safely disassembling tanks and replacing rubber gaskets for maintenance.
Identifies electrical components and their functions within the unit's wiring schematic.
Guides users through diagnosing and resolving common problems like lack of power or cooling issues.
Outlines the warranty period, conditions for coverage, and specific items or situations that are not covered.
General| Model | RBD-32 |
|---|---|
| Brand | Avantco |
| Number of Bowls | 2 |
| Housing Material | Stainless Steel |
| Category | Juicer |
| Warranty | 1 Year |
