EasyManua.ls Logo

Avante SMART FLEX 2 - Troubleshooting Guide; Base and Remote Functionality Issues; Motion and Noise Problems

Avante SMART FLEX 2
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TROUBLESHOOTING
10.
Below are a list of possible symptoms & their solutions should the
adjustable base fail to operate properly
SYMPTOMS SOLUTIONS
The base does not respond when
the remote is used. Remote LEF
illuminates and appears to be nor-
mal
Perform any or all of the following:
* Check that the power cord is plugged in-
to a working & grounded electrical outlet
* Check that the light on the transformer
is on
* Check the home’s circuit breaker and
fuses
* Unplug the power cord from the outlet.
After one minute, plug it back in . Press
any button on the remote
The remote does not work or light
up
* Check the remote LED light is lighting
up when pressed. If not, please replace
3*1.5V AAA batteries
Base stutters while in motion * Clear any clutter or obstructions under
& around the adjustable base. Radio fre-
quency interference from other remotes or
electronic devises may affect normal opera-
tion.
* Check batteries in remote
* Assure the keys on remote are being
pressed firmly down when operating the
Head & Foot buttons