Features
1. Extreme ow power consumption and a three years super ong
battery life (10 15 times usesa day).
2. Easyto set up; press and hold the Volume button on the receiver
for 3 seconds and the LED will blink; press the button on the
transmitter to complete paring.
3.52 optional melodies; easy to choose between next and previous;
built-in 40 mm stereo speaker delivers rich and crisp sound.
4. Uses a power chip from American Power ntegrations, offering a
reliable maximum of 250 mA current.
5. Provides a massive 400 m wireless distance range (depending on the
operating environment).
6. Custom encoded software communication method ensures better
privacy and no interference from other devices.
7.The transmitter is P55 dust-proof and water-resistant, fit for various
outdoor environments.
8. Memory function adds convenience. Every time you turn on the
device after a power outage, it wil still maintain your ast set melody
and volume eve .
Installation
Transmitter battery installation
The battery is pre-instal ed in the transmitter. Insert the key into the
al otted slot.Twist the key clockwise to open. Peeloff the insu ating film
on the button cell then close the cover.
Note: please notice the polarity of the button cell when replacing the
battery.
Transmitter installation
Adhesive tape: apply the double-sided adhesive tape on the back
of the transmitter. Remove the outer side of the tape and attach the
transmitter in the desired ocation on the wal and press hard for 30
seconds.
2. Screws and anchors: there are screw ocator knockouts on the back
of the transmitter; punch these out to al ow the screws to pass
through and fix the transmitter with the anchors in the desired
ocation on the wal .
05
To Next Page
Loading...