Operating Instructions
Pairing method
1. Plug the receiver into the power socket.
2. Press and hold the Volume button on the receiver for 3
seconds to enter pairing mode. The indicator will blink.
3. Press the transmitter and the receiver will chime "ding
dong" to indicate the pairing is complete.
Notes
l. Pressany button on the receiveror wait for 60 secondsto exit the
pairing mode.
2 Thereceiver has two indication lights. One blue and one red The
blue is the default light ond wi// illuminate in the first pairing. The
red will Illuminate in the secondpairing. The two colors will
alternore Olong with the poirings.
Melody selection
There are 52 melodies for the doorbel kit. Press the Next button for the
next melody and the Previous button for the ast one. You can easily
choose your favorite chime tone.
06
Volume adiustment
There are five volume evels in total and the minimum volume evel is
si ent. Press the Volume button to select a ower volume level. When
the volume reaches its minimum, press the button again it wou d turn
to the maximum volume.
Notice
. Pleasedo not place this transmitter in areasclose to metals.
2. The working distance varies with the b ockage from different
ambient environments.
3. Use this product properly to prolong its lifespan.
Never repair the interior circuit to prevent destroying the inside
4.
electronic components.
07
To Next Page
Loading...