48 Apr-09
Avantes www.avantes.com info@avantes.com
External I/O connector
The external I/O connector is a female high density 26 poles Sub-D connector, connected to the
Master spectrometer channel.
general purpose TTL output, PWM
general purpose TTL output, PWM
general purpose TTL output, AvSoft FOS control
AVALIGHT-XE (DB26/DB15-p1)
Output, one ore more TTL pulses per scan
TTL Input, external hardware trigger
TTL input, AvaSoft-Save spectrum
AvaLight-LED (DB26/DB15-
p14)
general purpose TTL output, PWM, AvaSoft-
PWM
Output, used to close shutter for AvaLight-HAL-
S, AvaLight-DHc and AvaLight-DHS
general purpose TTL output, PWM
TTL input, AvaSoft-Save reference
general purpose TTL output, PWM
general purpose TTL output, PWM
general purpose TTL output, PWM
TTL output, AvaSoft programmable delay and
duration
TTL input, AvaSoft-Save dark
general purpose TTL output
Ordering Information
CONN-DB26-RM Extra DB26-IO connector output for Desktop/Rackmount for USB2 platform
multichannel AvaSpec
IC-DB26-2 Interface cable AvaSpec-USB2 platform to DB15 for AvaLight-S with shutter
for auto save dark/ lamp off, AvaLight-XE control
IC-DB26/DB9-2 Interface cable AvaSpec-USB2 platform to RS232 DB9 cable
IC-DB26/DB9/DB15-2 Interface Y cable AvaSpec-USB2 platform to RS-232 (DB9) and AvaLight-S
(DB15) with shutter for auto save dark/ lamp off, AvaLight-XE control
IC-DB26-FOS2-2 Interface Y-cable AvaSpec-USB2 platform to FOS-2 and AvaLight-S with
shutter, 2m
IC-DB26-EXTRIG-BNC-2 Interface cable AvaSpec-USB2 platform to BNC plug External trigger, 2 m