Do you have a question about the Avantes AVASPEC-128 and is the answer not in the manual?
Number of Pixels | 128 |
---|---|
Interface | USB2.0 |
Dimensions | 175 x 110 x 44 mm |
Spectral Range | 200-1100 nm |
A/D Converter/Resolution | 16 bit |
Power Supply | USB powered |
Detector Type | Linear CCD array |
Instructions for installing the AvaSpec spectrometer software.
Steps to launch the AvaSpec software application.
Procedure for acquiring and saving spectral data.
Typical configurations for absorbance, transmission, and irradiance experiments.
Detailed information on the AvaSpec-128 model.
Detailed information on the AvaSpec-256 model.
Detailed information on the AvaSpec-1024 model.
Detailed information on the AvaSpec-2048 model.
Information on the AvaSpec-2048L with larger pixels.
Details on the Ultra Low Straylight AvaSpec-ULS2048.
Detailed information on the AvaSpec-3648 model.
Info on the UV-sensitive AvaSpec-2048x14.
Details on the NIR AvaSpec-NIR256.
Information on connecting spectrometers via USB1 and USB2.
Details on multichannel AvaSpec spectrometers.
Info on the thermo-electric cooled AvaSpec-2048TEC.
Description of the main window components of AvaSoft.
Detailed description of menu options in AvaSoft.
Troubleshooting guide for AvaSoft software issues.
Information on the AvaLight-HAL halogen light source.
Details on the AvaLight-HAL-S with shutter.
Information on the calibrated AvaLight-HAL-CAL.
Information on AvaLight-LED light sources.
Details on the AvaLight-DHc Deuterium-Halogen source.
Information on the AvaLight-XE Xenon pulsed light source.
Details on the calibrated AvaLight-DH-CAL UV/VIS source.
Information on AvaLight-CAL calibration sources.
Information on different sleeving materials for fiber optics.
Details on various types of fiber optic cables.
Information on fiber optic reflection probes.
Details on fiber optic transmission dip probes.
Overview of fiber optic accessories.
Information on integrating spheres for measurements.
Details on cuvette holders for transmission/fluorescence.
Details on the FOS-1/2-inline Fiber Optic Switch.
Information on flow cells for absorption measurements.
Details on the WS-2 white reflective tile.