10 Apr-09
Avantes www.avantes.com info@avantes.com
Starting AvaSoft
AvaSoft can be started after data communication has been established. The first time that AvaSoft is
started for the Bluetooth spectrometer, it will show the dialog at the right.
Click
communication through RS-
list with available comports will be displayed. In
our example, COM8 has been selected for the
Bluetooth
®
data communication. Select the right
COM port from the list and click OK. AvaSoft will
now read the configuration data from the
spectrometer (this can take about 15 seconds),
after which measurements can be started.
To Next Page
Loading...
Need help?
General
