Avantes AVASPEC-128 - Fiber optics

Apr-09 105
Avantes www.avantes.com info@avantes.com
Technical Data
Lamp
HgAr
Neon
Ar
Output
Hg and Ar lines
from 254 nm to
965 nm
340-1100nm
696-1704 nm
Power requirement
12VDC supply (+inside, GND outside), 240 mA
Optical power in 600µm fiber
1.6 mW
Connector
SMA 905 connector
Internal Voltage
1200 Volts AC at 30 kHz, 10 mA
Warm up
1 minute for vapor stabilization
Dimensions
175 x 110 x 44 mm
Ordering Information
AvaLight-CAL
Mercury-Argon Spectral Calibration Source
AvaLight-CAL-NEON
Neon Calibration source needs extra PS-12V/1.0A power supply, SMA
AvaLight-CAL-AR
Argon Calibration source needs extra PS-12V/1.0A power supply, SMA
AvaLight-CAL-RM
Rack mounted version of Mercury-Argon Spectral Calibration Source
AvaLight-CAL-B
Replacement bulb, Mercury-Argon
AvaLight-CAL-NEON-B
Replacement bulb, Neon
AvaLight-CAL-AR-B
Replacement bulb, Argon
PS-12V/1.0A
Power supply 100-240VAC/12VDC, 1.0A for AvaLight-CAL