Avantes AVASPEC-128 - AvaLight-HAL-CAL Calibrated Tungsten halogen light source

84 Apr-09
Avantes www.avantes.com info@avantes.com
Technical Data
AvaLight-HAL
(standard)
AvaLight-HAL
(long life)
AvaLight-HAL (high
power)
Wavelength Range
360 - 2500 nm
Stability
± 0.1%
Time to stabilize
Ca. 15 min.
Output to bulb
12.7 VDC/ 0.9A
11.3 VDC/ 0.8A
14.1 VDC/ 1.0A
Bulb Life
1000 hrs
> 2000 hrs
< 1000 hrs
Optical power 200µm fiber
0.5 mWatt
0.35 mWatt
0.7 mWatt
Optical power 600µm fiber
4.5 mWatt
3.2 mWatt
6 mWatt
Optical power 1000µm fiber
10 mWatt
7 mWatt
14 mWatt
Bulb Color Temperature
2.850 K
2.700 K
3.000 K
DB-15 connector
Pin 10 = GND
Pin 13 = TTL input, high  shutter open, low shutter closed
Power requirement
24 VDC (+inside, GND outside)/ 1.25A
Dimensions (mm)
132 x 110 x 44 mm
Ordering Information
AvaLight-HAL
10W Tungsten Halogen Lamp, fan-cooled, needs extra PS-24V/1.25A power supply
AvaLight-HAL-S
10W Tungsten Halogen Lamp, fan-cooled, incl. TTL shutter, needs extra PS-
24V/1.25A power supply
AvaLight-HAL-S-RM
Rack mounted version of the 10W Tungsten Halogen Lamp, fan-cooled, incl. TTL
shutter
IC-DB15-2
Interface cable AvaSpec-USB1 platform to AvaLight-HAL-S
IC-DB26-2
Interface cable AvaSpec-USB2 platform to AvaLight-HAL-S
AvaLight-HAL-B
10W Tungsten Halogen Replacement bulb for AvaLight-HAL, AvaLight-HAL-S
CUV-HAL
Direct attach cuvette holder for AvaLight-HAL
PS-24V/1.25A
Power supply 100-240VAC/24VDC, 1.25A, necessary for AvaLight-HAL