Apr-09 17
Avantes www.avantes.com info@avantes.com
Resolution table (FWHM) for AvaSpec-128
Ordering Information
AvaSpec-128 Fiber Optic Spectrometer, 45 mm Avabench, 128 pixel PDA detector,
USB1.1/RS-232 interface, incl AvaSoft-Basic, USB interface cable and a PS-
12V/1.0A power supply, specify grating, wavelength range and options
AvaSpec-128-USB2 Fiber Optic Spectrometer, 45 mm Avabench, 128 pixel PDA detector, USB
powered high speed USB2 interface, incl AvaSoft-Basic, USB interface cable,
specify grating, wavelength range and options
AvaSpec-128-2 Dual Channel Fiber Optic Spectrometer, 2 * 45 mm Avabench, 128 pixel PDA
detector, USB1.1/RS-232 interface, incl AvaSoft-Basic, USB interface cable
and a PS-12V/1.0A power supply, for both channels specify grating,
wavelength range and options
Options
-SPU incl. switch for USB powered USB1 or external power for RS232
-SPU2 incl. switch for USB powered USB2 or external power for RS232
-SPU2-BT Bluetooth interface for USB2 platform only, including antenna and switch
SDXXX Internal XXX MB SD card for on board data saving, for USB2 platform only
DCL-VIS Detector collection lens to enhance sensitivity, PMMA, 360-1100nm
SLIT-XX Slit size, please specify XX = 50, 100, 200, 500 µm
OSF-YYY Order sorting filter for 2
nd
order effects filtering, please specify YY= 385,
475, 515, 550, 600 nm
N.B. In order to change a grating, wavelength range or any of the options, the unit needs to be
returned to Avantes manufacturing, please ask for an RFU number (see page 4 of this manual).
The cost for the so-called AvaSpec-Upgrade depends on the modification that needs to be done.
To Next Page
Loading...
