EasyManua.ls Logo

Avantes AVASPEC-128 - Page 19

Avantes AVASPEC-128
129 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
18 Apr-09
Avantes www.avantes.com info@avantes.com
2.2 AvaSpec-256 Fiber Optic Spectrometer
AvaSpec-256
The AvaSpec-256 Fiber Optic Spectrometer is
based on the AvaBench-45 symmetrical Czerny-
Turner design with 256 pixel CMOS Detector
Array. The spectrometer has a fiber optic
entrance connector (standard SMA, others
possible), collimating and focusing mirror and
diffractional grating. A choice of 13 different
gratings with different dispersion and blaze
angles enable applications in the 200-1100nm
range. The AvaSpec-256 can be delivered with
2 platforms of electronics; either with USB1.1
with 14 bit AD converter or the new USB2.0
interface with 16 bit AD converter.
The AvaSpec-256 is specially suitable for low
noise applications. Digital IO ports enable external triggering and control of shutter and pulsed light
sources from the Avantes line of instruments.
The AvaSpec-256 is also available as dual channel or multiple channel instrument (up to 8 channels),
where all spectra are taken simultaneously.
The AvaSpec-256 comes with AvaSoft-basic, a complete manual, USB interface cable and a PS-
12V/1.0A power supply. AvaSoft-full and application software can be ordered separately.
Alternatively the AvaSpec-256-SPU has a switch to run on USB power or external power.
The new AvaSpec-USB2 has a USB2 interface with ultrafast datasampling of 1500 spectra per second
(with on board averaging) and datatransfer in 1.5msec and supports analog in-and outputs as well.
Optional Bluetooth (-BT) communication and an SD card for on-board saving of spectra can be
added. The AvaSpec-256-USB2 runs on USB power and comes with AvaSoft-basic, a complete manual
and USB interface cable. Multiple (up to 127) USB2 spectrometers with different detector types can
be externally coupled. AvaSoft-full and application software can be ordered separately.
Technical Data
Spectrometer platform
AvaSpec-256-USB2
Optical Bench
Symmetrical Czerny-Turner, 45 mm focal length
Wavelength range
200-1100 nm
Resolution
0.4 64 nm, depending on configuration (see table)
Stray light
< 0.2%
Sensitivity (AvaLight-HAL, 8 µm fiber)
counts/µW per ms integration time
30 (14-bit AD)
120 (16-bit AD)
Detector
CMOS linear array, 256 pixels
Signal/Noise
2000:1
AD converter
16 bit, 500 kHz
Integration time
0.6 msec 10 minutes
SMA
entrance connector

Related product manuals