50 Apr-09
Avantes www.avantes.com info@avantes.com
2.12.1 Connections
Power LED green and scan LED yellow
The green and yellow LED´s act as status LED´s for the micro controller with following meaning:
Green LED = off, power is not connected
Green LED = on, power is on, micro controller ready, no errors
Green LED = blinking, permanent error detected by micro controller
Yellow LED = on, when scan is transmitted to PC
TE Cooling switch and indicator
The blue switch is used to switch on the CCD detector cooling, the green LED=on indicates that the
CCD detector cooling is switched on.
Switch in down position Cooling is on
Switch in up position Cooling is off
100-240 VAC power plug and mains switch
To Next Page
Loading...
