Apr-09 55
Avantes www.avantes.com info@avantes.com
Channel button (USB1 platform only)
After clicking the Channel button, a dialog is shown in which the spectrometer channels can be
selected, for which data will be acquired and displayed. The same result can be achieved with the
option View-Channel.
Scope button
By clicking the S button, the data will be presented in Scope Mode. The same result can be achieved
with the option View-Scope Mode.
Absorbance button
By clicking the A button, the data will be presented in Absorbance Mode. The same result can be
achieved with the option View-Absorbance Mode.
Transmission button
By clicking the T button, the data will be presented in Transmittance Mode. The same result can be
achieved with the option View-Transmittance Mode.
Irradiance button
By clicking the I button, the data will be presented in Irradiance Mode. The same result can be
achieved with the option View-Irradiance Mode.
Auto scale Y-axis button
By clicking this button, the graph will be rescaled on-line. A maximum signal will be shown at about
75% of the vertical scale. The same result can be achieved with the option View-Auto scale Y-axis
Change Graph Scale button
By clicking this button, a dialog will be shown in which the range can be changed for both X- and Y-
axis. This range can be saved as well and restored any time by clicking the Goto Preset Scale button
(see below). The menu option with the same functionality is View-Change Graph Scale.
To Next Page
Loading...
