Apr-09 57
Avantes www.avantes.com info@avantes.com
Wavelength[nm]
The wavelength shows the position of the cursor, which becomes visible if the cursor button is down.
The amplitude of the signal, which is given in the status bar at the bottom of the main window, is
the amplitude at the wavelength shown in this field.
Multichannel USB2 only
For multichannel USB2 spectrometers the integration time
and averaging can be set for all channels at the same value
by clicking to All.
If the dashed box is clicked, different integration time and
averaging can be set per channel .
Graphical region
The graphical region
displays the data in an
XY-diagram, with at
the X-axis the
wavelength in
nanometer, and at the
Y-axis the detector
counts. After loading or
saving a reference and
dark spectrum, other
units can be selected
at the Y-axis:
Absorbance Units,
Percentage
Transmittance, or
Relative Irradiance.
Display saved Graph and Line style editor
By clicking on the legenda with the right mouse button, multiple spectra, that were saved earlier
can be displayed.
New in AvaSoft 7 is that displayed graphs can be deleted or
properties of the displayed graphs, such as line style or color or
comments can be changed. This is done by clicking with the
right mouse button on the line in the graphical
display. A small line edit box will occur.
Now the line can be deactivated or the line properties
can be changed as depicted in the border editor or
the comments can be edited.
To Next Page
Loading...
