Avantes AVASPEC-128 - Page 95

94 Apr-09
Avantes www.avantes.com info@avantes.com
15 pin dB Connector Pinout AvaLight-XE
Pin
Description
1
Strobe fire
10
GND
Specifications
Power requirement
12 VDC/550 mA (+inside, GND outside)
(6 W)
Total Optical Power output (max.)
39 µJ per pulse, 3.9 mW(average)
Optical power in 600 µm fiber
1.8 µJ per pulse, 180µW(average)
Synchronization Input
15 pin sub D connector, TTL level
Pulse Duration
5 µsec (at 1/3 height)
Pulse duration
6 µsec
Pulse rate (max.)
100 Hz
Bulb Life
min. 10
9
pulses
Spectral Output
200 nm to 1000 nm
Connector
SMA-905 connector
Dimensions
175 x 110 x 44 mm
Ordering Information
AvaLight-XE
Xenon Light Source (200-1000nm), needs interface cable and power supply
AvaLight-XE-DUV
Xenon Light Source for DUV (160-1000nm), needs interface cable and power
supply
AvaLight-XE-B
Spare bulb for the AvaLight-XE (200-1000nm)
AvaLight-XE-B-DUV
Spare bulb for the AvaLight-XE-DUV (160-1000nm)
IC-DB15-2
Interface cable AvaSpec-USB1 platform to AvaLight-XE
IC-DB26-2
Interface cable AvaSpec-USB2 platform to AvaLight-XE
CUV-XE
Direct attach cuvette holder for AvaLight-XE
PS-12V/1.0A
Power supply 100-240VAC/12VDC, 1.0A for AvaLight-XE