20 Apr-09
Avantes www.avantes.com info@avantes.com
Resolution table (FWHM) for AvaSpec-256
Ordering Information
AvaSpec-256 Fiber Optic Spectrometer, 45 mm Avabench, 256 pixel CMOS detector,
USB1.1/RS-232 interface, incl AvaSoft-Basic, USB cable and PS-12V/1.0A
power supply ,specify grating, wavelength range and options
AvaSpec-256-USB2 Fiber Optic Spectrometer, 45 mm Avabench, 256 pixel CMOS detector, USB
powered high speed USB2 interface, incl. AvaSoft-Basic, USB interface cable,
specify grating, wavelength range and options
AvaSpec-256-2 Dual channel Fiber Optic Spectrometer, 2 * 45 mm Avabench, 256 pixel CMOS
detector, USB1.1/RS-232 interface, incl AvaSoft-Basic, USB cable and PS-
12V/1.0A power supply ,for both channels specify grating, wavelength range
and options
Options
-SPU incl. switch for USB powered USB1 or external power for RS232
-SPU2 incl. switch for USB powered USB2 or external power for RS232
-SPU2-BT Bluetooth interface for USB2 platform only, including antenna and switch
SDXXX Internal XXX MB SD card for on board data saving, for USB2 platform only
SLIT-XX Slit size, please specify XX = 25, 50, 100, 200, 500 µm
OSF-YYY Order sorting filter for 2
nd
order effects filtering, please specify YY= 385,
475, 515, 550, 600nm
N.B. In order to change a grating, wavelength range or any of the options, the unit needs to be
returned to Avantes manufacturing, please ask for an RFU number (see page 4 of this manual).
The cost for the socalled AvaSpec-Upgrade depends on the modification that needs to be done.