To Next PageTo Next PageWhy is my Avanti Kitchen Appliance beverage center not cold enough?
If your Avanti Kitchen Appliance beverage center isn't cold enough, first check the temperature control setting to ensure it's properly adjusted. The external environment might require a higher setting. Also, avoid opening the door too often or leaving it open, and make sure the door gasket seals correctly.
What to do if my Avanti Kitchen Appliance beverage center does not operate?
If your Avanti Kitchen Appliance beverage center does not operate, make sure that it is plugged in and turned on. Also, check the circuit breaker or fuse.
How to fix the door that will not close properly on my Avanti Kitchen Appliance?
If the door of your Avanti Kitchen Appliance beverage center won't close properly, check if the unit is level. Also, ensure the door was correctly installed if it was reversed, the gasket is clean, and the shelves are properly positioned.
Why does my Avanti Kitchen Appliance turn on and off frequently?
Several factors can cause your Avanti Kitchen Appliance beverage center to turn on and off frequently. The room temperature may be hotter than normal, or a large amount of contents may have been added. Opening the door too often or not closing it completely, an incorrect temperature control setting, or a faulty door gasket seal can also contribute to this issue.
Why is my Avanti Kitchen Appliance making too much noise?
If your Avanti Kitchen Appliance beverage center seems too noisy, the rattling noise could be the normal flow of refrigerant. You might also hear gurgling sounds as each cycle ends, caused by the refrigerant flow. Additionally, contraction and expansion of the inside walls can cause popping and crackling noises. Ensure the beverage center is level.
How to fix the light that does not work in my Avanti Kitchen Appliance?
If the light in your Avanti Kitchen Appliance beverage center isn't working, begin by ensuring the unit is plugged in and the circuit breaker hasn't tripped. Also, verify that the light button is turned to the “ON” position.
What to do if my Avanti BCA5102SS-1 has vibrations?
To address vibrations in your Avanti Kitchen Appliance beverage center, start by checking to ensure the unit is level.
Pre-use checks and preparation steps for the beverage center, including parts verification.
Guidelines for proper placement, leveling, and connection of the beverage center.
Guide to adjusting the internal temperature using the control panel buttons.
Instructions for cleaning the interior and exterior of the beverage center.
Contact information and services offered by Avanti customer support.
General| Color | Stainless Steel |
|---|---|
| Power Consumption | 120W |
| Installation | Countertop |
| Power | 120W |
| Voltage | 110-120V |
